audiostuff: spandsp-0.0.6pre17/config/install-sh comparison

comparison spandsp-0.0.6pre17/config/install-sh @ 4:26cd8f1ef0b1

import spandsp-0.0.6pre17

author	Peter Meerwald <pmeerw@cosy.sbg.ac.at>
date	Fri, 25 Jun 2010 15:50:58 +0200
parents
children

comparison

equal deleted inserted replaced

-:c6c5a16ce2f2
+:26cd8f1ef0b1
+#!/bin/sh
+# install - install a program, script, or datafile
+scriptversion=2005-05-14.22
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+# set DOITPROG to echo to test this script
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+# put in absolute paths if you don't have them in your path; or use env. vars.
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+or: $0 [OPTION]... SRCFILES... DIRECTORY
+or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+or: $0 [OPTION]... -d DIRECTORIES...
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+Environment variables override the default commands:
+CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+while test -n "$1"; do
+case $1 in
+-c) shift
+continue;;
+-d) dir_arg=true
+shift
+continue;;
+-g) chgrpcmd="$chgrpprog $2"
+shift
+shift
+continue;;
+--help) echo "$usage"; exit $?;;
+-m) chmodcmd="$chmodprog $2"
+shift
+shift
+continue;;
+-o) chowncmd="$chownprog $2"
+shift
+shift
+continue;;
+-s) stripcmd=$stripprog
+shift
+continue;;
+-t) dstarg=$2
+	shift
+	shift
+	continue;;
+-T) no_target_directory=true
+	shift
+	continue;;
+--version) echo "$0 $scriptversion"; exit $?;;
+*)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+# Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+esac
+done
+if test -z "$1"; then
+if test -z "$dir_arg"; then
+echo "$0: no input file specified." >&2
+exit 1
+fi
+# It's OK to call `install-sh -d' without argument.
+# This can happen when creating conditional directories.
+exit 0
+fi
+for src
+do
+# Protect names starting with `-'.
+case $src in
+-*) src=./$src ;;
+esac
+if test -n "$dir_arg"; then
+dst=$src
+src=
+if test -d "$dst"; then
+mkdircmd=:
+chmodcmd=
+else
+mkdircmd=$mkdirprog
+fi
+else
+# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+if test ! -f "$src" && test ! -d "$src"; then
+echo "$0: $src does not exist." >&2
+exit 1
+fi
+if test -z "$dstarg"; then
+echo "$0: no destination specified." >&2
+exit 1
+fi
+dst=$dstarg
+# Protect names starting with `-'.
+case $dst in
+-*) dst=./$dst ;;
+esac
+# If destination is a directory, append the input filename; won't work
+# if double slashes aren't ignored.
+if test -d "$dst"; then
+if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+fi
+dst=$dst/`basename "$src"`
+fi
+fi
+# This sed command emulates the dirname command.
+dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+# Make sure that the destination directory exists.
+# Skip lots of stat calls in the usual case.
+if test ! -d "$dstdir"; then
+defaultIFS='
+	 '
+IFS="${IFS-$defaultIFS}"
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+shift
+IFS=$oIFS
+pathcomp=
+while test $# -ne 0 ; do
+pathcomp=$pathcomp$1
+shift
+if test ! -d "$pathcomp"; then
+$mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+fi
+pathcomp=$pathcomp/
+done
+fi
+if test -n "$dir_arg"; then
+$doit $mkdircmd "$dst" \
+&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+else
+dstfile=`basename "$dst"`
+# Make a couple of temp file names in the proper directory.
+dsttmp=$dstdir/_inst.$$_
+rmtmp=$dstdir/_rm.$$_
+# Trap to clean up those temp files at exit.
+trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+trap '(exit $?); exit' 1 2 13 15
+# Copy the file name to the temp name.
+$doit $cpprog "$src" "$dsttmp" &&
+# and set any options; do chmod last to preserve setuid bits.
+#
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $cpprog $src $dsttmp" command.
+#
+{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+# Now rename the file to the real destination.
+{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+|| {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+}
+fi || { (exit 1); exit 1; }
+done
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+(exit 0); exit 0
+}
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

Mercurial > hg > audiostuff

comparison spandsp-0.0.6pre17/config/install-sh @ 4:26cd8f1ef0b1