comparison spandsp-0.0.6pre17/src/spandsp/private/v29tx.h @ 4:26cd8f1ef0b1

import spandsp-0.0.6pre17
author Peter Meerwald <pmeerw@cosy.sbg.ac.at>
date Fri, 25 Jun 2010 15:50:58 +0200
parents
children
comparison
equal deleted inserted replaced
3:c6c5a16ce2f2 4:26cd8f1ef0b1
1 /*
2 * SpanDSP - a series of DSP components for telephony
3 *
4 * private/v29tx.h - ITU V.29 modem transmit part
5 *
6 * Written by Steve Underwood <steveu@coppice.org>
7 *
8 * Copyright (C) 2003 Steve Underwood
9 *
10 * All rights reserved.
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU Lesser General Public License version 2.1,
14 * as published by the Free Software Foundation.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU Lesser General Public License for more details.
20 *
21 * You should have received a copy of the GNU Lesser General Public
22 * License along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * $Id: v29tx.h,v 1.2 2009/07/09 13:52:09 steveu Exp $
26 */
27
28 #if !defined(_SPANDSP_PRIVATE_V29TX_H_)
29 #define _SPANDSP_PRIVATE_V29TX_H_
30
31 /*! The number of taps in the pulse shaping/bandpass filter */
32 #define V29_TX_FILTER_STEPS 9
33
34 /*!
35 V.29 modem transmit side descriptor. This defines the working state for a
36 single instance of a V.29 modem transmitter.
37 */
38 struct v29_tx_state_s
39 {
40 /*! \brief The bit rate of the modem. Valid values are 4800, 7200 and 9600. */
41 int bit_rate;
42 /*! \brief The callback function used to get the next bit to be transmitted. */
43 get_bit_func_t get_bit;
44 /*! \brief A user specified opaque pointer passed to the get_bit function. */
45 void *get_bit_user_data;
46
47 /*! \brief The callback function used to report modem status changes. */
48 modem_tx_status_func_t status_handler;
49 /*! \brief A user specified opaque pointer passed to the status function. */
50 void *status_user_data;
51
52 /*! \brief Gain required to achieve the specified output power, not allowing
53 for the size of the current constellation. */
54 float base_gain;
55 /*! \brief Gain required to achieve the specified output power, allowing
56 for the size of the current constellation. */
57 #if defined(SPANDSP_USE_FIXED_POINT)
58 int32_t gain;
59 #else
60 float gain;
61 #endif
62
63 /*! \brief The route raised cosine (RRC) pulse shaping filter buffer. */
64 #if defined(SPANDSP_USE_FIXED_POINT)
65 complexi16_t rrc_filter[2*V29_TX_FILTER_STEPS];
66 #else
67 complexf_t rrc_filter[2*V29_TX_FILTER_STEPS];
68 #endif
69 /*! \brief Current offset into the RRC pulse shaping filter buffer. */
70 int rrc_filter_step;
71
72 /*! \brief The register for the data scrambler. */
73 unsigned int scramble_reg;
74 /*! \brief The register for the training scrambler. */
75 uint8_t training_scramble_reg;
76 /*! \brief TRUE if transmitting the training sequence, or shutting down transmission.
77 FALSE if transmitting user data. */
78 int in_training;
79 /*! \brief A counter used to track progress through sending the training sequence. */
80 int training_step;
81 /*! \brief An offset value into the table of training parameters, used to match the
82 training pattern to the bit rate. */
83 int training_offset;
84
85 /*! \brief The current phase of the carrier (i.e. the DDS parameter). */
86 uint32_t carrier_phase;
87 /*! \brief The update rate for the phase of the carrier (i.e. the DDS increment). */
88 int32_t carrier_phase_rate;
89 /*! \brief The current fractional phase of the baud timing. */
90 int baud_phase;
91 /*! \brief The code number for the current position in the constellation. */
92 int constellation_state;
93 /*! \brief The get_bit function in use at any instant. */
94 get_bit_func_t current_get_bit;
95 /*! \brief Error and flow logging control */
96 logging_state_t logging;
97 };
98
99 #endif
100 /*- End of file ------------------------------------------------------------*/

Repositories maintained by Peter Meerwald, pmeerw@pmeerw.net.