Mercurial > hg > audiostuff
diff spandsp-0.0.6pre17/tests/at_interpreter_tests.c @ 4:26cd8f1ef0b1
import spandsp-0.0.6pre17
author | Peter Meerwald <pmeerw@cosy.sbg.ac.at> |
---|---|
date | Fri, 25 Jun 2010 15:50:58 +0200 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/spandsp-0.0.6pre17/tests/at_interpreter_tests.c Fri Jun 25 15:50:58 2010 +0200 @@ -0,0 +1,571 @@ +/* + * SpanDSP - a series of DSP components for telephony + * + * at_interpreter_tests.c - Tests for the AT interpreter. + * + * Written by Steve Underwood <steveu@coppice.org> + * + * Copyright (C) 2004, 2005, 2006 Steve Underwood + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * $Id: at_interpreter_tests.c,v 1.24 2009/10/09 14:53:57 steveu Exp $ + */ + +/*! \file */ + +/*! \page at_interpreter_tests_page AT interpreter tests +\section at_interpreter_tests_page_sec_1 What does it do? +These tests exercise all the commands which should be understood by the AT interpreter. +*/ + +#if defined(HAVE_CONFIG_H) +#include "config.h" +#endif + +#include <stdlib.h> +#include <stdio.h> +#include <fcntl.h> +#include <unistd.h> +#include <string.h> +#include <assert.h> +#include <sndfile.h> + +#define SPANDSP_EXPOSE_INTERNAL_STRUCTURES +#include "spandsp.h" + +#define DLE 0x10 +#define ETX 0x03 +#define SUB 0x1A + +#define MANUFACTURER "www.soft-switch.org" + +struct command_response_s +{ + const char *command; + const char *response; +}; + +static const struct command_response_s general_test_seq[] = +{ + /* Try the various cases for "AT" */ + {"atE1\r", "atE1\r\r\nOK\r\n"}, + {"AtE1\r", "AtE1\r\r\nOK\r\n"}, + {"aTE1\r", "aTE1\r\r\nOK\r\n"}, + {"ATE1\r", "ATE1\r\r\nOK\r\n"}, + {"ATE0\r", "ATE0\r\r\nOK\r\n"}, + + /* Try the various command formats */ + {"ATS8?\r", "\r\n005\r\n\r\nOK\r\n"}, + {"ATS8=1\r", "\r\nOK\r\n"}, + {"ATS8.5?\r", "\r\n0\r\n\r\nOK\r\n"}, + {"ATS8.5=1\r", "\r\nOK\r\n"}, + {"ATS8.5?\r", "\r\n1\r\n\r\nOK\r\n"}, + {"ATS8?\r", "\r\n033\r\n\r\nOK\r\n"}, + {"AT+FCLASS=1\r", "\r\nOK\r\n"}, + {"AT+FCLASS?\r", "\r\n1\r\n\r\nOK\r\n"}, + {"AT+FCLASS=?\r", "\r\n0,1,1.0\r\n\r\nOK\r\n"}, + + /* Try all the commands */ + {"AT&C\r", "\r\nOK\r\n"}, /* V.250 6.2.8 - Circuit 109 (received line signal detector), behaviour */ + {"AT&D\r", "\r\nOK\r\n"}, /* V.250 6.2.9 - Circuit 108 (data terminal ready) behaviour */ + {"AT&F\r", "\r\nOK\r\n"}, /* V.250 6.1.2 - Set to factory-defined configuration */ + {"ATE0\r", "ATE0\r\r\nOK\r\n"}, /* Counteract the effects of the above */ + {"AT+A8E=?\r", "\r\n+A8E:(0-6),(0-5),(00-FF)\r\n\r\nOK\r\n"}, /* V.251 5.1 - V.8 and V.8bis operation controls */ + {"AT+A8M\r", "\r\nOK\r\n"}, /* V.251 5.2 - Send V.8 menu signals */ + {"AT+A8T=?\r", "\r\n+A8T:(0-10)\r\n\r\nOK\r\n"}, /* V.251 5.3 - Send V.8bis signal and/or message(s) */ + {"AT+ASTO=?\r", "\r\n+ASTO:\r\n\r\nOK\r\n"}, /* V.250 6.3.15 - Store telephone number */ + {"AT+CAAP=?\r", "\r\n+CAAP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.25 - Automatic answer for eMLPP Service */ + {"AT+CACM=?\r", "\r\n+CACM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.25 - Accumulated call meter */ + {"AT+CACSP=?\r", "\r\n+CACSP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.7 - Voice Group or Voice Broadcast Call State Attribute Presentation */ + {"AT+CAEMLPP=?\r", "\r\n+CAEMLPP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.22 - eMLPP Priority Registration and Interrogation */ + {"AT+CAHLD=?\r", "\r\n+CAHLD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.3 - Leave an ongoing Voice Group or Voice Broadcast Call */ + {"AT+CAJOIN=?\r", "\r\n+CAJOIN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.1 - Accept an incoming Voice Group or Voice Broadcast Call */ + {"AT+CALA=?\r", "\r\n+CALA:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.16 - Alarm */ + {"AT+CALCC=?\r", "\r\n+CALCC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.6 - List current Voice Group and Voice Broadcast Calls */ + {"AT+CALD=?\r", "\r\n+CALD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.38 - Delete alar m */ + {"AT+CALM=?\r", "\r\n+CALM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.20 - Alert sound mode */ + {"AT+CAMM=?\r", "\r\n+CAMM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.26 - Accumulated call meter maximum */ + {"AT+CANCHEV=?\r", "\r\n+CANCHEV:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.8 - NCH Support Indication */ + {"AT+CAOC=?\r", "\r\n+CAOC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.16 - Advice of Charge */ + {"AT+CAPD=?\r", "\r\n+CAPD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.39 - Postpone or dismiss an alarm */ + {"AT+CAPTT=?\r", "\r\n+CAPTT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.4 - Talker Access for Voice Group Call */ + {"AT+CAREJ=?\r", "\r\n+CAREJ:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.2 - Reject an incoming Voice Group or Voice Broadcast Call */ + {"AT+CAULEV=?\r", "\r\n+CAULEV:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.5 - Voice Group Call Uplink Status Presentation */ + {"AT+CBC=?\r", "\r\n+CBC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.4 - Battery charge */ + {"AT+CBCS=?\r", "\r\n+CBCS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.3.2 - VBS subscriptions and GId status */ + {"AT+CBST=?\r", "\r\n+CBST:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.7 - Select bearer service type */ + {"AT+CCFC=?\r", "\r\n+CCFC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.11 - Call forwarding number and conditions */ + {"AT+CCLK=?\r", "\r\n+CCLK:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.15 - Clock */ + {"AT+CCUG=?\r", "\r\n+CCUG:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.10 - Closed user group */ + {"AT+CCWA=?\r", "\r\n+CCWA:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.12 - Call waiting */ + {"AT+CCWE=?\r", "\r\n+CCWE:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.28 - Call Meter maximum event */ + {"AT+CDIP=?\r", "\r\n+CDIP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.9 - Called line identification presentation */ + {"AT+CDIS=?\r", "\r\n+CDIS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.8 - Display control */ + {"AT+CEER=?\r", "\r\n+CEER:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.10 - Extended error report */ + {"AT+CFCS=?\r", "\r\n+CFCS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.24 - Fast call setup conditions */ + {"AT+CFUN=?\r", "\r\n+CFUN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.2 - Set phone functionality */ + {"AT+CGACT=?\r", "\r\n+CGACT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.10 - PDP context activate or deactivate */ + {"AT+CGANS=?\r", "\r\n+CGANS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.16 - Manual response to a network request for PDP context activation */ + {"AT+CGATT=?\r", "\r\n+CGATT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.9 - PS attach or detach */ + {"AT+CGAUTO=?\r", "\r\n+CGAUTO:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.15 - Automatic response to a network request for PDP context activation */ + {"AT+CGCLASS=?\r", "\r\n+CGCLASS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.17 - GPRS mobile station class (GPRS only) */ + {"AT+CGCLOSP=?\r", "\r\n+CGCLOSP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.13 - Configure local octet stream PAD parameters (Obsolete) */ + {"AT+CGCLPAD=?\r", "\r\n+CGCLPAD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.12 - Configure local triple-X PAD parameters (GPRS only) (Obsolete) */ + {"AT+CGCMOD=?\r", "\r\n+CGCMOD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.11 - PDP Context Modify */ + {"AT+CGCS=?\r", "\r\n+CGCS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.3.1 - VGCS subscriptions and GId status */ + {"AT+CGDATA=?\r", "\r\n+CGDATA:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.12 - Enter data state */ + {"AT+CGDCONT=?\r", "\r\n+CGDCONT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.1 - Define PDP Context */ + {"AT+CGDSCONT=?\r", "\r\n+CGDSCONT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.2 - Define Secondary PDP Context */ + {"AT+CGEQMIN=?\r", "\r\n+CGEQMIN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.7 - 3G Quality of Service Profile (Minimum acceptable) */ + {"AT+CGEQNEG=?\r", "\r\n+CGEQNEG:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.8 - 3G Quality of Service Profile (Negotiated) */ + {"AT+CGEQREQ=?\r", "\r\n+CGEQREQ:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.6 - 3G Quality of Service Profile (Requested) */ + {"AT+CGEREP=?\r", "\r\n+CGEREP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.18 - Packet Domain event reporting */ + {"AT+CGMI=?\r", "\r\n+CGMI:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.1 - Request manufacturer identification */ + {"AT+CGMM=?\r", "\r\n+CGMM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.2 - Request model identification */ + {"AT+CGMR=?\r", "\r\n+CGMR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.3 - Request revision identification */ + {"AT+CGPADDR=?\r", "\r\n+CGPADDR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.14 - Show PDP address */ + {"AT+CGQMIN=?\r", "\r\n+CGQMIN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.5 - Quality of Service Profile (Minimum acceptable) */ + {"AT+CGQREQ=?\r", "\r\n+CGQREQ:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.4 - Quality of Service Profile (Requested) */ + {"AT+CGREG=?\r", "\r\n+CGREG:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.19 - GPRS network registration status */ + {"AT+CGSMS=?\r", "\r\n+CGSMS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.20 - Select service for MO SMS messages */ + {"AT+CGSN=?\r", "\r\n+CGSN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.4 - Request product serial number identification */ + {"AT+CGTFT=?\r", "\r\n+CGTFT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 10.1.3 - Traffic Flow Template */ + {"AT+CHLD=?\r", "\r\n+CHLD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.13 - Call related supplementary services */ + {"AT+CHSA=?\r", "\r\n+CHSA:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.18 - HSCSD non-transparent asymmetry configuration */ + {"AT+CHSC=?\r", "\r\n+CHSC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.15 - HSCSD current call parameters */ + {"AT+CHSD=?\r", "\r\n+CHSD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.12 - HSCSD device parameters */ + {"AT+CHSN=?\r", "\r\n+CHSN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.14 - HSCSD non-transparent call configuration */ + {"AT+CHSR=?\r", "\r\n+CHSR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.16 - HSCSD parameters report */ + {"AT+CHST=?\r", "\r\n+CHST:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.13 - HSCSD transparent call configuration */ + {"AT+CHSU=?\r", "\r\n+CHSU:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.17 - HSCSD automatic user initiated upgrading */ + {"AT+CHUP=?\r", "\r\n+CHUP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.5 - Hangup call */ + {"AT+CIMI=?\r", "\r\n+CIMI:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.6 - Request international mobile subscriber identity */ + {"AT+CIND=?\r", "\r\n+CIND:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.9 - Indicator control */ + {"AT+CKPD=?\r", "\r\n+CKPD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.7 - Keypad control */ + {"AT+CLAC=?\r", "\r\n+CLAC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.37 - List all available AT commands */ + {"AT+CLAE=?\r", "\r\n+CLAE:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.31 - Language Event */ + {"AT+CLAN=?\r", "\r\n+CLAN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.30 - Set Language */ + {"AT+CLCC=?\r", "\r\n+CLCC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.18 - List current calls */ + {"AT+CLCK=?\r", "\r\n+CLCK:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.4 - Facility lock */ + {"AT+CLIP=?\r", "\r\n+CLIP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.6 - Calling line identification presentation */ + {"AT+CLIR=?\r", "\r\n+CLIR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.7 - Calling line identification restriction */ + {"AT+CLVL=?\r", "\r\n+CLVL:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.23 - Loudspeaker volume level */ + {"AT+CMAR=?\r", "\r\n+CMAR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.36 - Master Reset */ + {"AT+CMEC=?\r", "\r\n+CMEC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.6 - Mobile Termination control mode */ + {"AT+CMER=?\r", "\r\n+CMER:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.10 - Mobile Termination event reporting */ + {"AT+CMOD=?\r", "\r\n+CMOD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.4 - Call mode */ + {"AT+CMUT=?\r", "\r\n+CMUT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.24 - Mute control */ + {"AT+CMUX=?\r", "\r\n+CMUX:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.7 - Multiplexing mode */ + {"AT+CNUM=?\r", "\r\n+CNUM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.1 - Subscriber number */ + {"AT+COLP=?\r", "\r\n+COLP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.8 - Connected line identification presentation */ + {"AT+COPN=?\r", "\r\n+COPN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.21 - Read operator names */ + {"AT+COPS=?\r", "\r\n+COPS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.3 - PLMN selection */ + {"AT+COTDI=?\r", "\r\n+COTDI:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 11.1.9 - Originator to Dispatcher Information */ + {"AT+CPAS=?\r", "\r\n+CPAS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.1 - Phone activity status */ + {"AT+CPBF=?\r", "\r\n+CPBF:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.13 - Find phonebook entries */ + {"AT+CPBR=?\r", "\r\n+CPBR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.12 - Read phonebook entries */ + {"AT+CPBS=?\r", "\r\n+CPBS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.11 - Select phonebook memory storage */ + {"AT+CPBW=?\r", "\r\n+CPBW:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.14 - Write phonebook entry */ + {"AT+CPIN=?\r", "\r\n+CPIN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.3 - Enter PIN */ + {"AT+CPLS=?\r", "\r\n+CPLS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.20 - Selection of preferred PLMN list */ + {"AT+CPOL=?\r", "\r\n+CPOL:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.19 - Preferred PLMN list */ + {"AT+CPPS=?\r", "\r\n+CPPS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.23 - eMLPP subscriptions */ + {"AT+CPROT=?\r", "\r\n+CPROT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.42 - Enter protocol mode */ + {"AT+CPUC=?\r", "\r\n+CPUC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.27 - Price per unit and currency table */ + {"AT+CPWC=?\r", "\r\n+CPWC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.29 - Power class */ + {"AT+CPWD=?\r", "\r\n+CPWD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.5 - Change password */ + {"AT+CR=?\r", "\r\n+CR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.9 - Service reporting control */ + {"AT+CRC=?\r", "\r\n+CRC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.11 - Cellular result codes */ + {"AT+CREG=?\r", "\r\n+CREG:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.2 - Network registration */ + {"AT+CRLP=?\r", "\r\n+CRLP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.8 - Radio link protocol */ + {"AT+CRMC=?\r", "\r\n+CRMC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.34 - Ring Melody Control */ + {"AT+CRMP=?\r", "\r\n+CRMP:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.35 - Ring Melody Playback */ + {"AT+CRSL=?\r", "\r\n+CRSL:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.21 - Ringer sound level */ + {"AT+CRSM=?\r", "\r\n+CRSM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.18 - Restricted SIM access */ + {"AT+CSCC=?\r", "\r\n+CSCC:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.19 - Secure control command */ + {"AT+CSCS=?\r", "\r\n+CSCS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 5.5 - Select TE character set */ + {"AT+CSDF=?\r", "\r\n+CSDF:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.22 - Settings date format */ + {"AT+CSGT=?\r", "\r\n+CSGT:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.32 - Set Greeting Text */ + {"AT+CSIL=?\r", "\r\n+CSIL:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.23 - Silence Command */ + {"AT+CSIM=?\r", "\r\n+CSIM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.17 - Generic SIM access */ + {"AT+CSNS=?\r", "\r\n+CSNS:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.19 - Single numbering scheme */ + {"AT+CSQ=?\r", "\r\n+CSQ:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.5 - Signal quality */ + {"AT+CSSN=?\r", "\r\n+CSSN:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.17 - Supplementary service notifications */ + {"AT+CSTA=?\r", "\r\n+CSTA:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.1 - Select type of address */ + {"AT+CSTF=?\r", "\r\n+CSTF:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.24 - Settings time format */ + {"AT+CSVM=?\r", "\r\n+CSVM:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.33 - Set Voice Mail Number */ + {"AT+CTFR=?\r", "\r\n+CTFR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.14 - Call deflection */ + {"AT+CTZR=?\r", "\r\n+CTZR:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.41 - Time Zone Reporting */ + {"AT+CTZU=?\r", "\r\n+CTZU:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.40 - Automatic Time Zone Update */ + {"AT+CUSD=?\r", "\r\n+CUSD:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.15 - Unstructured supplementary service data */ + {"AT+CUUS1=?\r", "\r\n+CUUS1:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 7.26 - User to User Signalling Service 1 */ + {"AT+CV120=?\r", "\r\n+CV120:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.21 - V.120 rate adaption protocol */ + {"AT+CVHU=?\r", "\r\n+CVHU:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 6.20 - Voice Hangup Control */ + {"AT+CVIB=?\r", "\r\n+CVIB:\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 8.22 - Vibrator mode */ + {"AT+DR=?\r", "\r\n+DR:\r\n\r\nOK\r\n"}, /* V.250 6.6.2 - Data compression reporting */ + {"AT+DS=?\r", "\r\n+DS:\r\n\r\nOK\r\n"}, /* V.250 6.6.1 - Data compression */ + {"AT+EB=?\r", "\r\n+EB:\r\n\r\nOK\r\n"}, /* V.250 6.5.2 - Break handling in error control operation */ + {"AT+EFCS=?\r", "\r\n+EFCS:(0-2)\r\n\r\nOK\r\n"}, /* V.250 6.5.4 - 32-bit frame check sequence */ + {"AT+EFCS?\r", "\r\n+EFCS:0\r\n\r\nOK\r\n"}, + {"AT+EFRAM=?\r", "\r\n+EFRAM:(1-65535),(1-65535)\r\n\r\nOK\r\n"}, + /* V.250 6.5.8 - Frame length */ + {"AT+ER=?\r", "\r\n+ER:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.5.5 - Error control reporting */ + {"AT+ES=?\r", "\r\n+ES:(0-7),(0-4),(0-9)\r\n\r\nOK\r\n"}, /* V.250 6.5.1 - Error control selection */ + {"AT+ES?\r", "\r\n+ES:0,0,0\r\n\r\nOK\r\n"}, + {"AT+ESA=?\r", "\r\n+ESA:(0-2),(0-1),(0-1),(0-1),(0-2),(0-1),(0-255),(0-255)\r\n\r\nOK\r\n"}, + /* V.80 8.2 - Synchronous access mode configuration */ + {"AT+ESA?\r", "\r\n+ESA:0,0,0,0,0,0,0,0\r\n\r\nOK\r\n"}, + {"AT+ESR\r", "\r\nOK\r\n"}, /* V.250 6.5.3 - Selective repeat */ + {"AT+ETBM=?\r", "\r\n+ETBM:(0-2),(0-2),(0-30)\r\n\r\nOK\r\n"}, /* T.31 8.5.1 - Adaptive reception control */ + {"AT+ETBM?\r", "\r\n+ETBM:0,0\r\n\r\nOK\r\n"}, + {"AT+EWIND=?\r", "\r\n+EWIND:(1-127),(1-127)\r\n\r\nOK\r\n"}, /* V.250 6.5.7 - Window size */ + {"AT+EWIND?\r", "\r\n+EWIND:0,0\r\n\r\nOK\r\n"}, + {"AT+F34=?\r", "\r\n+F34:(0-14),(0-14),(0-2),(0-14),(0-14)\r\n\r\nOK\r\n"}, + /* T.31 B.6.1 - Initial V.34 rate controls for FAX */ + {"AT+F34?\r", "\r\n+F34:0,0,0,0,0\r\n\r\nOK\r\n"}, + {"AT+FAR=?\r", "\r\n0,1\r\n\r\nOK\r\n"}, /* T.31 8.5.1 - Adaptive reception control */ + {"AT+FAR?\r", "\r\n0\r\n\r\nOK\r\n"}, + {"AT+FCL=?\r", "\r\n(0-255)\r\n\r\nOK\r\n"}, /* T.31 8.5.2 - Carrier loss timeout */ + {"AT+FCLASS=?\r", "\r\n0,1,1.0\r\n\r\nOK\r\n"}, /* T.31 8.2 - Capabilities identification and control */ + {"AT+FCLASS?\r", "\r\n1\r\n\r\nOK\r\n"}, + {"AT+FDD=?\r", "\r\n(0,1)\r\n\r\nOK\r\n"}, /* T.31 8.5.3 - Double escape character replacement */ + {"AT+FDD?\r", "\r\n0\r\n\r\nOK\r\n"}, + {"AT+FIT=?\r", "\r\n+FIT:(0-255),(0-1)\r\n\r\nOK\r\n"}, /* T.31 8.5.4 - DTE inactivity timeout */ + {"AT+FIT?\r", "\r\n+FIT:0,0\r\n\r\nOK\r\n"}, + {"AT+FLO\r", "\r\nOK\r\n"}, /* T.31 says to implement something similar to +IFC */ + {"AT+FMI?\r", "\r\n" MANUFACTURER "\r\n\r\nOK\r\n"}, /* T.31 says to duplicate +GMI */ + {"AT+FMM?\r", "\r\n" PACKAGE "\r\n\r\nOK\r\n"}, /* T.31 says to duplicate +GMM */ + {"AT+FMR?\r", "\r\n" VERSION "\r\n\r\nOK\r\n"}, /* T.31 says to duplicate +GMR */ + {"AT+FPR=?\r", "\r\n115200\r\n\r\nOK\r\n"}, /* T.31 says to implement something similar to +IPR */ + {"AT+FPR?\r", "\r\n0\r\n\r\nOK\r\n"}, + {"AT+FRH=?\r", "\r\n3\r\n\r\nOK\r\n"}, /* T.31 8.3.6 - HDLC receive */ + {"AT+FRH?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+FRM=?\r", "\r\n24,48,72,73,74,96,97,98,121,122,145,146\r\n\r\nOK\r\n"}, /* T.31 8.3.4 - Facsimile receive */ + {"AT+FRM?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+FRS=?\r", "\r\n0-255\r\n\r\nOK\r\n"}, /* T.31 8.3.2 - Receive silence */ + {"AT+FRS?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+FTH=?\r", "\r\n3\r\n\r\nOK\r\n"}, /* T.31 8.3.5 - HDLC transmit */ + {"AT+FTH?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+FTM=?\r", "\r\n24,48,72,73,74,96,97,98,121,122,145,146\r\n\r\nOK\r\n"}, /* T.31 8.3.3 - Facsimile transmit */ + {"AT+FTM?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+FTS=?\r", "\r\n0-255\r\n\r\nOK\r\n"}, /* T.31 8.3.1 - Transmit silence */ + {"AT+FTS?\r", "\r\n-1\r\n\r\nOK\r\n"}, + {"AT+GCAP\r", "\r\nOK\r\n"}, /* V.250 6.1.9 - Request complete capabilities list */ + {"AT+GCI=?\r", "\r\n+GCI:(00-FF)\r\n\r\nOK\r\n"}, /* V.250 6.1.10 - Country of installation, */ + {"AT+GCI?\r", "\r\n+GCI:00\r\n\r\nOK\r\n"}, + {"AT+GMI?\r", "\r\n" MANUFACTURER "\r\n\r\nOK\r\n"}, /* V.250 6.1.4 - Request manufacturer identification */ + {"AT+GMM?\r", "\r\n" PACKAGE "\r\n\r\nOK\r\n"}, /* V.250 6.1.5 - Request model identification */ + {"AT+GMR?\r", "\r\n" VERSION "\r\n\r\nOK\r\n"}, /* V.250 6.1.6 - Request revision identification */ + {"AT+GOI\r", "\r\nOK\r\n"}, /* V.250 6.1.8 - Request global object identification */ + {"AT+GSN?\r", "\r\n42\r\n\r\nOK\r\n"}, /* V.250 6.1.7 - Request product serial number identification */ + {"AT+IBC=?\r", "\r\n+IBC:(0-2),(0,1),(0,1),(0,1),(0,1),(0,1),(0,1),(0,1),(0,1),(0,1),(0,1),(0.1),(0,1)\r\n\r\nOK\r\n"}, + /* V.80 7.9 - Control of in-band control */ + {"AT+IBC?\r", "\r\n+IBC:0,0,0,0,0,0,0,0,0,0,0,0,0\r\n\r\nOK\r\n"}, + {"AT+IBM=?\r", "\r\n+IBM:(0-7),(0-255),(0-255)\r\n\r\nOK\r\n"}, /* V.80 7.10 - In-band MARK idle reporting control */ + {"AT+IBM?\r", "\r\n+IBM:0,0,0\r\n\r\nOK\r\n"}, + {"AT+ICF?\r", "\r\n+ICF:0,0\r\n\r\nOK\r\n"}, /* V.250 6.2.11 - DTE-DCE character framing */ + {"AT+ICLOK?\r", "\r\n+ICLOK:0\r\n\r\nOK\r\n"}, /* V.250 6.2.14 - Select sync transmit clock source */ + {"AT+IDSR?\r", "\r\n+IDSR:0\r\n\r\nOK\r\n"}, /* V.250 6.2.16 - Select data set ready option */ + {"AT+IFC\r", "\r\nOK\r\n"}, /* V.250 6.2.12 - DTE-DCE local flow control */ + {"AT+ILRR\r", "\r\nOK\r\n"}, /* V.250 6.2.13 - DTE-DCE local rate reporting */ + {"AT+ILSD=?\r", "\r\n+ILSD:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.2.15 - Select long space disconnect option */ + {"AT+ILSD?\r", "\r\n+ILSD:0\r\n\r\nOK\r\n"}, + {"AT+IPR=?\r", "\r\n+IPR:(115200),(115200)\r\n\r\nOK\r\n"}, /* V.250 6.2.10 - Fixed DTE rate */ + {"AT+IPR?\r", "\r\n+IPR:0\r\n\r\nOK\r\n"}, + {"AT+IRTS=?\r", "\r\n+IRTS:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.2.17 - Select synchronous mode RTS option */ + {"AT+IRTS?\r", "\r\n+IRTS:0\r\n\r\nOK\r\n"}, + {"AT+MA\r", "\r\nOK\r\n"}, /* V.250 6.4.2 - Modulation automode control */ + {"AT+MR=?\r", "\r\n+MR:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.4.3 - Modulation reporting control */ + {"AT+MR?\r", "\r\n+MR:0\r\n\r\nOK\r\n"}, + {"AT+MS\r", "\r\nOK\r\n"}, /* V.250 6.4.1 - Modulation selection */ + {"AT+MSC=?\r", "\r\n+MSC:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.4.8 - Seamless rate change enable */ + {"AT+MSC?\r", "\r\n+MSC:0\r\n\r\nOK\r\n"}, + {"AT+MV18AM\r", "\r\nOK\r\n"}, /* V.250 6.4.6 - V.18 answering message editing */ + {"AT+MV18P=?\r", "\r\n+MV18P:(2-7)\r\n\r\nOK\r\n"}, /* V.250 6.4.7 - Order of probes */ + {"AT+MV18P?\r", "\r\n+MV18P:0\r\n\r\nOK\r\n"}, + {"AT+MV18R=?\r", "\r\n+MV18R:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.4.5 - V.18 reporting control */ + {"AT+MV18R?\r", "\r\n+MV18R:0\r\n\r\nOK\r\n"}, + {"AT+MV18S\r", "\r\nOK\r\n"}, /* V.250 6.4.4 - V.18 selection */ + {"AT+TADR\r", "\r\nOK\r\n"}, /* V.250 6.7.2.9 - Local V.54 address */ + {"AT+TAL=?\r", "\r\n+TAL:(0,1),(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.15 - Local analogue loop */ + {"AT+TAL?\r", "\r\n+TAL:0,0\r\n\r\nOK\r\n"}, + {"AT+TALS=?\r", "\r\n+TALS:(0-3)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.6 - Analogue loop status */ + {"AT+TALS?\r", "\r\n+TALS:0\r\n\r\nOK\r\n"}, + {"AT+TDLS=?\r", "\r\n+TDLS:(0-4)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.7 - Local digital loop status */ + {"AT+TDLS?\r", "\r\n+TDLS:0\r\n\r\nOK\r\n"}, + {"AT+TE140=?\r", "\r\n+TE140:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.1 - Enable ckt 140 */ + {"AT+TE140?\r", "\r\n+TE140:0\r\n\r\nOK\r\n"}, + {"AT+TE141=?\r", "\r\n+TE141:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.2 - Enable ckt 141 */ + {"AT+TE141?\r", "\r\n+TE141:0\r\n\r\nOK\r\n"}, + {"AT+TEPAL=?\r", "\r\n+TEPAL:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.5 - Enable front panel analogue loop */ + {"AT+TEPAL?\r", "\r\n+TEPAL:0\r\n\r\nOK\r\n"}, + {"AT+TEPDL=?\r", "\r\n+TEPDL:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.4 - Enable front panel RDL */ + {"AT+TEPDL?\r", "\r\n+TEPDL:0\r\n\r\nOK\r\n"}, + {"AT+TERDL=?\r", "\r\n+TERDL:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.3 - Enable RDL from remote */ + {"AT+TERDL?\r", "\r\n+TERDL:0\r\n\r\nOK\r\n"}, + {"AT+TLDL=?\r", "\r\n+TLDL:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.13 - Local digital loop */ + {"AT+TLDL?\r", "\r\n+TLDL:0\r\n\r\nOK\r\n"}, + {"AT+TMODE=?\r", "\r\n+TMODE:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.10 - Set V.54 mode */ + {"AT+TMODE?\r", "\r\n+TMODE:0\r\n\r\nOK\r\n"}, + {"AT+TNUM\r", "\r\nOK\r\n"}, /* V.250 6.7.2.12 - Errored bit and block counts */ + {"AT+TRDL=?\r", "\r\n+TRDL:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.14 - Request remote digital loop */ + {"AT+TRDL?\r", "\r\n+TRDL:0\r\n\r\nOK\r\n"}, + {"AT+TRDLS\r", "\r\nOK\r\n"}, /* V.250 6.7.2.8 - Remote digital loop status */ + {"AT+TRES=?\r", "\r\n+TRES:(0-2)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.17 - Self test result */ + {"AT+TRES?\r", "\r\n+TRES:0\r\n\r\nOK\r\n"}, + {"AT+TSELF=?\r", "\r\n+TSELF:(0,1)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.16 - Self test */ + {"AT+TSELF?\r", "\r\n+TSELF:0\r\n\r\nOK\r\n"}, + {"AT+TTER=?\r", "\r\n+TTER:(0-65535),(0-65535)\r\n\r\nOK\r\n"}, /* V.250 6.7.2.11 - Test error rate */ + {"AT+TTER?\r", "\r\n+TTER:0,0\r\n\r\nOK\r\n"}, + {"AT+VBT\r", "\r\nOK\r\n"}, /* 3GPP TS 27.007 C.2.2 - Buffer threshold setting */ + {"AT+VCID=?\r", "\r\n0,1\r\n\r\nOK\r\n"}, /* 3GPP TS 27.007 C.2.3 - Calling number ID presentation */ + {"AT+VCID?\r", "\r\n0\r\n\r\nOK\r\n"}, + {"AT+VDR\r", "\r\nOK\r\n"}, /* V.253 10.3.1 - Distinctive ring (ring cadence reporting) */ + {"AT+VDT\r", "\r\nOK\r\n"}, /* V.253 10.3.2 - Control tone cadence reporting */ + {"AT+VDX\r", "\r\nOK\r\n"}, /* V.253 10.5.6 - Speakerphone duplex mode */ + {"AT+VEM\r", "\r\nOK\r\n"}, /* V.253 10.5.7 - Deliver event reports */ + {"AT+VGM\r", "\r\nOK\r\n"}, /* V.253 10.5.2 - Microphone gain */ + {"AT+VGR\r", "\r\nOK\r\n"}, /* V.253 10.2.1 - Receive gain selection */ + {"AT+VGS\r", "\r\nOK\r\n"}, /* V.253 10.5.3 - Speaker gain */ + {"AT+VGT\r", "\r\nOK\r\n"}, /* V.253 10.2.2 - Volume selection */ + {"AT+VIP\r", "\r\nOK\r\n"}, /* V.253 10.1.1 - Initialize voice parameters */ + {"AT+VIT\r", "\r\nOK\r\n"}, /* V.253 10.2.3 - DTE/DCE inactivity timer */ + {"AT+VLS\r", "\r\nOK\r\n"}, /* V.253 10.2.4 - Analogue source/destination selection */ + {"AT+VPP\r", "\r\nOK\r\n"}, /* V.253 10.4.2 - Voice packet protocol */ + {"AT+VRA\r", "\r\nOK\r\n"}, /* V.253 10.2.5 - Ringing tone goes away timer */ + {"AT+VRID?\r", "\r\n0\r\n\r\nOK\r\n"}, /* Extension - Find the originating and destination numbers */ + {"AT+VRL\r", "\r\nOK\r\n"}, /* V.253 10.1.2 - Ring local phone */ + {"AT+VRN\r", "\r\nOK\r\n"}, /* V.253 10.2.6 - Ringing tone never appeared timer */ + {"AT+VRX\r", "\r\nOK\r\n"}, /* V.253 10.1.3 - Voice receive state */ + {"AT+VSD\r", "\r\nOK\r\n"}, /* V.253 10.2.7 - Silence detection (QUIET and SILENCE) */ + {"AT+VSID=12345\r", "\r\nOK\r\n"}, /* Extension - Set the originating number */ + {"AT+VSID?\r", "\r\n12345\r\n\r\nOK\r\n"}, + {"AT+VSM\r", "\r\nOK\r\n"}, /* V.253 10.2.8 - Compression method selection */ + {"AT+VSP\r", "\r\nOK\r\n"}, /* V.253 10.5.1 - Voice speakerphone state */ + {"AT+VTA\r", "\r\nOK\r\n"}, /* V.253 10.5.4 - Train acoustic echo-canceller */ + {"AT+VTD\r", "\r\nOK\r\n"}, /* V.253 10.2.9 - Beep tone duration timer */ + {"AT+VTH\r", "\r\nOK\r\n"}, /* V.253 10.5.5 - Train line echo-canceller */ + {"AT+VTR\r", "\r\nOK\r\n"}, /* V.253 10.1.4 - Voice duplex state */ + {"AT+VTS\r", "\r\nOK\r\n"}, /* V.253 10.1.5 - DTMF and tone generation in voice */ + {"AT+VTX\r", "\r\nOK\r\n"}, /* V.253 10.1.6 - Transmit data state */ + {"AT+WS46\r", "\r\nOK\r\n"}, /* 3GPP TS 27.007 5.9 - PCCA STD-101 [17] select wireless network */ + {"ATA\r", "\r\nERROR\r\n"}, /* V.250 6.3.5 - Answer */ + {"ATDT -1234567890ABCDPSTW*#+,!@\r;", ""}, /* V.250 6.3.1 - Dial */ + {"ATE1\r", "\r\nOK\r\n"}, /* V.250 6.2.4 - Command echo */ + {"ATE0\r", "ATE0\r\r\nOK\r\n"}, /* V.250 6.2.4 - Command echo */ + {"ATH\r", "\r\nOK\r\n"}, /* V.250 6.3.6 - Hook control */ + {"ATI\r", "\r\n" PACKAGE "\r\n\r\nOK\r\n"}, /* V.250 6.1.3 - Request identification information */ + {"ATL\r", "\r\nOK\r\n"}, /* V.250 6.3.13 - Monitor speaker loudness */ + {"ATM\r", "\r\nOK\r\n"}, /* V.250 6.3.14 - Monitor speaker mode */ + {"ATO\r", "\r\nCONNECT\r\n\r\nOK\r\n"}, /* V.250 6.3.7 - Return to online data state */ + {"ATP\r", "\r\nOK\r\n"}, /* V.250 6.3.3 - Select pulse dialling (command) */ + {"ATQ\r", "\r\nOK\r\n"}, /* V.250 6.2.5 - Result code suppression */ + {"ATS0=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.3.8 - Automatic answer */ + {"ATS0?\r", "\r\n000\r\n\r\nOK\r\n"}, + {"ATS10=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.3.12 - Automatic disconnect delay */ + {"ATS10?\r", "\r\n000\r\n\r\nOK\r\n"}, + {"ATS3=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.2.1 - Command line termination character */ + {"ATS3?\r", "\r\n013\r\n\r\nOK\r\n"}, + {"ATS4=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.2.2 - Response formatting character */ + {"ATS4?\r", "\r\n010\r\n\r\nOK\r\n"}, + {"ATS5=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.2.3 - Command line editing character */ + {"ATS5?\r", "\r\n008\r\n\r\nOK\r\n"}, + {"ATS6=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.3.9 - Pause before blind dialling */ + {"ATS6?\r", "\r\n001\r\n\r\nOK\r\n"}, + {"ATS7=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.3.10 - Connection completion timeout */ + {"ATS7?\r", "\r\n060\r\n\r\nOK\r\n"}, + {"ATS8=?\r", "\r\n000\r\n\r\nOK\r\n"}, /* V.250 6.3.11 - Comma dial modifier time */ + {"ATS8?\r", "\r\n005\r\n\r\nOK\r\n"}, + {"ATT\r", "\r\nOK\r\n"}, /* V.250 6.3.2 - Select tone dialling (command) */ + {"ATV0\r", "0\r"}, /* V.250 6.2.6 - DCE response format */ + {"ATV1\r", "\r\nOK\r\n"}, + {"ATX4\r", "\r\nOK\r\n"}, /* V.250 6.2.7 - Result code selection and call progress monitoring control */ + {"ATZ\r", "\r\nOK\r\n"}, /* V.250 6.1.1 - Reset to default configuration */ + {"", ""} +}; + +char *decode_test_file = NULL; +int countdown = 0; +int command_response_test_step = -1; +char response_buf[1000]; +int response_buf_ptr = 0; + +static int at_rx(at_state_t *s, const char *t, int len) +{ + at_interpreter(s, t, len); + return 0; +} +/*- End of function --------------------------------------------------------*/ + +static int at_send(at_state_t *s, const char *t) +{ + printf("%s", t); + at_rx(s, t, strlen(t)); + return 0; +} +/*- End of function --------------------------------------------------------*/ + +#if 0 +static int at_send_at(at_state_t *s, const char *t) +{ + uint8_t buf[500]; + + sprintf((char *) buf, "AT%s\r", t); + printf("%s", t); + at_rx(s, t, strlen(t)); + return 0; +} +/*- End of function --------------------------------------------------------*/ + +static int at_expect(at_state_t *s, const char *t) +{ + return 0; +} +/*- End of function --------------------------------------------------------*/ + +static int at_send_hdlc(at_state_t *s, uint8_t *t, int len) +{ + uint8_t buf[100]; + int i; + int j; + + for (i = 0, j = 0; i < len; i++) + { + if (*t == DLE) + buf[j++] = DLE; + buf[j++] = *t++; + } + buf[j++] = DLE; + buf[j++] = ETX; + at_rx(s, (char *) buf, j); + return 0; +} +/*- End of function --------------------------------------------------------*/ +#endif + +static int general_test(at_state_t *s) +{ + int i; + + for (i = 0; general_test_seq[i].command[0]; i++) + { + response_buf_ptr = 0; + response_buf[0] = '\0'; + command_response_test_step = i; + at_send(s, general_test_seq[i].command); + if (strcmp(general_test_seq[command_response_test_step].response, response_buf) != 0) + { + printf("Incorrect response\n"); + printf("Expected: '%s'\n", general_test_seq[command_response_test_step].response); + printf("Received: '%s'\n", response_buf); + return -1; + } + } + return 0; +} +/*- End of function --------------------------------------------------------*/ + +static int modem_call_control(at_state_t *s, void *user_data, int op, const char *num) +{ + switch (op) + { + case AT_MODEM_CONTROL_CALL: + printf("\nModem control - Dialing '%s'\n", num); + break; + case AT_MODEM_CONTROL_ANSWER: + printf("\nModem control - Answering\n"); + /* Force an error response, so we get something well defined for the test. */ + return -1; + case AT_MODEM_CONTROL_HANGUP: + printf("\nModem control - Hanging up\n"); + break; + case AT_MODEM_CONTROL_OFFHOOK: + printf("\nModem control - Going off hook\n"); + break; + case AT_MODEM_CONTROL_ONHOOK: + printf("\nModem control - Going on hook\n"); + break; + case AT_MODEM_CONTROL_DTR: + printf("\nModem control - DTR %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_RTS: + printf("\nModem control - RTS %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_CTS: + printf("\nModem control - CTS %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_CAR: + printf("\nModem control - CAR %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_RNG: + printf("\nModem control - RNG %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_DSR: + printf("\nModem control - DSR %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_SETID: + printf("\nModem control - Set ID '%s'\n", num); + break; + case AT_MODEM_CONTROL_RESTART: + printf("\nModem control - Restart %d\n", (int) (intptr_t) num); + break; + case AT_MODEM_CONTROL_DTE_TIMEOUT: + printf("\nModem control - Set DTE timeout %d\n", (int) (intptr_t) num); + break; + default: + printf("\nModem control - operation %d\n", op); + break; + } + /*endswitch*/ + return 0; +} +/*- End of function --------------------------------------------------------*/ + +static int at_tx_handler(at_state_t *s, void *user_data, const uint8_t *buf, size_t len) +{ + int i; + + for (i = 0; i < len; i++) + { + response_buf[response_buf_ptr++] = buf[i]; + putchar(buf[i]); + } + response_buf[response_buf_ptr] = '\0'; + + return 0; +} +/*- End of function --------------------------------------------------------*/ + +int main(int argc, char *argv[]) +{ + at_state_t at_state; + + if (at_init(&at_state, at_tx_handler, NULL, modem_call_control, NULL) == NULL) + { + fprintf(stderr, "Cannot start the AT interpreter\n"); + exit(2); + } + if (general_test(&at_state)) + { + printf("Tests failed.\n"); + exit(2); + } + printf("Tests passed.\n"); + return 0; +} +/*- End of function --------------------------------------------------------*/ +/*- End of file ------------------------------------------------------------*/