--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/spandsp-0.0.6pre17/unpack_gsm0610_data.sh	Fri Jun 25 15:50:58 2010 +0200
@@ -0,0 +1,320 @@
+#!/bin/sh
+#
+# SpanDSP - a series of DSP components for telephony
+#
+# unpack_gsm0610_data.sh
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License version 2.1,
+# as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# $Id: unpack_gsm0610_data.sh,v 1.7 2008/05/03 10:59:44 steveu Exp $
+#
+
+# The ETSI distribution file extracts to 5 ZIP files, called DISK1.ZIP to DISK5.ZIP
+# These were originally the contents of 5 floppy disks. Disks 1 to 3 contain data
+# files. However, disks 4 and 5 contain .EXE files, which unpack.... but only in an
+# MS environment. These files need to be executed in a Windows or DOS environment,
+# or a good emulation like FreeDOS or Wine.
+
+ETSIDATA="../../../en_300961v080101p0.zip"
+
+cd test-data
+if [ -d etsi ]
+then
+    cd etsi
+else
+    mkdir etsi
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot create test-data/etsi!
+        exit $RETVAL
+    fi
+    cd etsi
+fi
+if [ -d gsm0610 ]
+then
+    cd gsm0610
+else
+    mkdir gsm0610
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot create test-data/etsi/gsm0610!
+        exit $RETVAL
+    fi
+    cd gsm0610
+fi
+
+if [ $1x ==  --no-exe-runx ]
+then
+    # Run the .exe files, which should be here
+    ./FR_A.EXE
+    ./FR_HOM_A.EXE
+    ./FR_SYN_A.EXE
+    ./FR_U.EXE
+    ./FR_HOM_U.EXE
+    ./FR_SYN_U.EXE
+    exit 0
+fi
+
+# Clear out any leftovers from the past
+rm -rf ASN.1.txt
+rm -rf DISK1.ZIP
+rm -rf DISK2.ZIP
+rm -rf DISK3.ZIP
+rm -rf DISK4.ZIP
+rm -rf DISK5.ZIP
+rm -rf *.EXE
+rm -rf READ_FRA.TXT
+rm -rf ACTION
+rm -rf unpacked
+
+if [ $1x ==  --no-exex ]
+then
+    # We need to prepare the .exe files to be run separately
+    rm -rf *.INP
+    rm -rf *.COD
+    rm -rf *.OUT
+
+    unzip ${ETSIDATA} >/dev/null
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot unpack the ETSI test vectors for GSM 06.10!
+        exit $RETVAL
+    fi
+    unzip ./DISK4.ZIP >/dev/null
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot unpack the ETSI test vectors for GSM 06.10!
+        exit $RETVAL
+    fi
+    unzip ./DISK5.ZIP >/dev/null
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot unpack the ETSI test vectors for GSM 06.10!
+        exit $RETVAL
+    fi
+    rm -rf ASN.1.txt
+    rm -rf DISK1.ZIP
+    rm -rf DISK2.ZIP
+    rm -rf DISK3.ZIP
+    rm -rf DISK4.ZIP
+    rm -rf DISK5.ZIP
+    rm -rf READ_FRA.TXT
+
+    # An environment which is emulating an MS one will probably need
+    # to make the .EXE files actually executable.
+    chmod 755 *.EXE
+
+    echo "Now copy the files from the test-data/etsi/gsm0610 directory to a Windows,"
+    echo "DOS or other machine which can run .exe files. Run each of the .exe"
+    echo "files (there are 6 of them), and copy the whole directory back here."
+    echo "You can then complete the creation of the working data directories"
+    echo "with the command:"
+    echo $0 "--no-exe-continue"
+    exit 0
+fi
+
+unzip ${ETSIDATA} >/dev/null
+RETVAL=$?
+if [ $RETVAL != 0 ]
+then
+    echo Cannot unpack the ETSI test vectors for GSM 06.10!
+    exit $RETVAL
+fi
+#rm ${ETSIDATA}
+
+rm -rf ASN.1.txt
+
+if [ $1x !=  --no-exe-continuex ]
+then
+    # We need to extract and run the .exe files right now. For this to succeed
+    # we must be running in an environment which can run .exe files. This has been
+    # tested with Cygwin on a Windows XP machine.
+    rm -rf *.INP
+    rm -rf *.COD
+    rm -rf *.OUT
+
+    unzip ./DISK4.ZIP >/dev/null
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot unpack the ETSI test vectors for GSM 06.10!
+        exit $RETVAL
+    fi
+    unzip ./DISK5.ZIP >/dev/null
+    RETVAL=$?
+    if [ $RETVAL != 0 ]
+    then
+        echo Cannot unpack the ETSI test vectors for GSM 06.10!
+        exit $RETVAL
+    fi
+    # An environment which is emulating an MS one will probably need
+    # to make the .EXE files actually executable.
+    chmod 755 *.EXE
+    ./FR_HOM_A.EXE >/dev/null
+    ./FR_SYN_A.EXE >/dev/null
+    ./FR_A.EXE >/dev/null
+    ./FR_HOM_U.EXE >/dev/null
+    ./FR_SYN_U.EXE >/dev/null
+    ./FR_U.EXE >/dev/null
+
+    rm -rf READ_FRA.TXT
+fi
+
+rm -rf DISK4.ZIP
+rm -rf DISK5.ZIP
+rm -rf *.EXE
+
+chmod 644 *.INP
+chmod 644 *.OUT
+chmod 644 *.COD
+
+# Create the directories where we want to put the test data files.
+mkdir unpacked
+mkdir unpacked/fr_A
+mkdir unpacked/fr_L
+mkdir unpacked/fr_U
+mkdir unpacked/fr_homing_A
+mkdir unpacked/fr_homing_L
+mkdir unpacked/fr_homing_U
+mkdir unpacked/fr_sync_A
+mkdir unpacked/fr_sync_L
+mkdir unpacked/fr_sync_U
+
+# Disks 1, 2 and 3 simply unzip, and the files have sensible file names. We
+# just need to rearrange the directories in which they are located.
+unzip ./DISK1.ZIP >/dev/null
+RETVAL=$?
+if [ $RETVAL != 0 ]
+then
+    echo Cannot unpack the ETSI test vectors for GSM 06.10!
+    exit $RETVAL
+fi
+unzip ./DISK2.ZIP >/dev/null
+RETVAL=$?
+if [ $RETVAL != 0 ]
+then
+    echo Cannot unpack the ETSI test vectors for GSM 06.10!
+    exit $RETVAL
+fi
+unzip ./DISK3.ZIP >/dev/null
+RETVAL=$?
+if [ $RETVAL != 0 ]
+then
+    echo Cannot unpack the ETSI test vectors for GSM 06.10!
+    exit $RETVAL
+fi
+rm -rf DISK1.ZIP
+rm -rf DISK2.ZIP
+rm -rf DISK3.ZIP
+
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK1/"* ./unpacked/fr_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/"Sync*.cod ./unpacked/fr_sync_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK2/"Seq*h.* ./unpacked/fr_homing_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/"Seq*h.* ./unpacked/fr_homing_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/Bitsync.inp" ./unpacked/fr_sync_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/Seqsync.inp" ./unpacked/fr_sync_L
+
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/Homing01.cod" ./unpacked/fr_homing_L
+mv "./ACTION/SMG#23/HOLD/0610_5~1/TESTSE~1/DISK3/Homing01.out" ./unpacked/fr_homing_L
+
+rm -rf ACTION
+
+# The files extracted by the .EXE files have messy naming, and are not in
+# a sane directory layout. We rename and move them, to make the final result of
+# the files extracted from all five of the original .ZIP files reasonably
+# consistent, and easy to follow.
+rm -rf READ_FRA.TXT
+
+for I in SYN*_A.COD ;
+do
+    mv $I `echo $I | sed -e "s|SYN|./unpacked/fr_sync_A/Sync|" | sed -e "s/COD/cod/"`
+done
+
+for I in SYN*_U.COD ;
+do
+    mv $I `echo $I | sed -e "s|SYN|./unpacked/fr_sync_U/Sync|" | sed -e "s/COD/cod/"`
+done
+
+for I in SEQ*H_A.COD ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_A/Seq|" | sed -e "s/COD/cod/"`
+done
+
+for I in SEQ*H_U.COD ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_U/Seq|" | sed -e "s/COD/cod/"`
+done
+
+for I in SEQ*H_A.INP ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_A/Seq|" | sed -e "s/INP/inp/"`
+done
+
+for I in SEQ*H_U.INP ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_U/Seq|" | sed -e "s/INP/inp/"`
+done
+
+for I in SEQ*H_A.OUT ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_A/Seq|" | sed -e "s/OUT/out/"`
+done
+
+for I in SEQ*H_U.OUT ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_homing_U/Seq|" | sed -e "s/OUT/out/"`
+done
+
+for I in SEQ*-A.COD ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_A/Seq|" | sed -e "s/COD/cod/"`
+done
+
+for I in SEQ*-U.COD ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_U/Seq|" | sed -e "s/COD/cod/"`
+done
+
+for I in SEQ*-A.INP ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_A/Seq|" | sed -e "s/INP/inp/"`
+done
+
+for I in SEQ*-U.INP ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_U/Seq|" | sed -e "s/INP/inp/"`
+done
+
+for I in SEQ*-A.OUT ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_A/Seq|" | sed -e "s/OUT/out/"`
+done
+
+for I in SEQ*-U.OUT ;
+do
+    mv $I `echo $I | sed -e "s|SEQ|./unpacked/fr_U/Seq|" | sed -e "s/OUT/out/"`
+done
+
+mv HOM01_A.OUT ./unpacked/fr_homing_A/Homing01_A.out
+mv HOM01_U.OUT ./unpacked/fr_homing_U/Homing01_U.out
+mv SEQSYN_A.INP ./unpacked/fr_sync_A/Seqsync_A.inp
+mv SEQSYN_U.INP ./unpacked/fr_sync_U/Seqsync_U.inp
+
+echo "The ETSI test vectors for GSM 06.10 should now be correctly laid out in the"
+echo "gsm0610 directory"