Mercurial > hg > audiostuff
diff spandsp-0.0.3/spandsp-0.0.3/src/spandsp/at_interpreter.h @ 5:f762bf195c4b
import spandsp-0.0.3
author | Peter Meerwald <pmeerw@cosy.sbg.ac.at> |
---|---|
date | Fri, 25 Jun 2010 16:00:21 +0200 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/spandsp-0.0.3/spandsp-0.0.3/src/spandsp/at_interpreter.h Fri Jun 25 16:00:21 2010 +0200 @@ -0,0 +1,267 @@ +/* + * SpanDSP - a series of DSP components for telephony + * + * at_interpreter.h - AT command interpreter to V.251, V.252, V.253, T.31 and the 3GPP specs. + * + * Written by Steve Underwood <steveu@coppice.org> + * + * Copyright (C) 2004, 2005, 2006 Steve Underwood + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * $Id: at_interpreter.h,v 1.10 2006/10/24 13:45:27 steveu Exp $ + */ + +/*! \file */ + +#if !defined(_AT_INTERPRETER_H_) +#define _AT_INTERPRETER_H_ + +/*! \page at_page AT command interpreter +\section at_page_sec_1 What does it do? +The AT interpreter module implements V.251, V.252, V.253, T.31 and various 3GPP +modem control commands. + +\section at_page_sec_2 How does it work? +*/ + +typedef struct at_state_s at_state_t; + +typedef int (at_modem_control_handler_t)(at_state_t *s, void *user_data, int op, const char *num); +typedef int (at_tx_handler_t)(at_state_t *s, void *user_data, const uint8_t *buf, size_t len); +typedef int (at_class1_handler_t)(at_state_t *s, void *user_data, int direction, int operation, int val); + +enum at_rx_mode_e +{ + AT_MODE_ONHOOK_COMMAND, + AT_MODE_OFFHOOK_COMMAND, + AT_MODE_CONNECTED, + AT_MODE_DELIVERY, + AT_MODE_HDLC, + AT_MODE_STUFFED +}; + +enum at_call_event_e +{ + AT_CALL_EVENT_ALERTING = 1, + AT_CALL_EVENT_CONNECTED, + AT_CALL_EVENT_ANSWERED, + AT_CALL_EVENT_BUSY, + AT_CALL_EVENT_NO_DIALTONE, + AT_CALL_EVENT_NO_ANSWER, + AT_CALL_EVENT_HANGUP +}; + +enum at_modem_control_operation_e +{ + AT_MODEM_CONTROL_CALL, + AT_MODEM_CONTROL_ANSWER, + AT_MODEM_CONTROL_HANGUP, + AT_MODEM_CONTROL_OFFHOOK, + AT_MODEM_CONTROL_ONHOOK, + AT_MODEM_CONTROL_DTR, + AT_MODEM_CONTROL_RTS, + AT_MODEM_CONTROL_CTS, + AT_MODEM_CONTROL_CAR, + AT_MODEM_CONTROL_RNG, + AT_MODEM_CONTROL_DSR, + AT_MODEM_CONTROL_SETID, + /* The remainder of the control functions should not get past the modem, to the + application. */ + AT_MODEM_CONTROL_RESTART, + AT_MODEM_CONTROL_DTE_TIMEOUT +}; + +enum +{ + AT_RESPONSE_CODE_OK = 0, + AT_RESPONSE_CODE_CONNECT, + AT_RESPONSE_CODE_RING, + AT_RESPONSE_CODE_NO_CARRIER, + AT_RESPONSE_CODE_ERROR, + AT_RESPONSE_CODE_XXX, + AT_RESPONSE_CODE_NO_DIALTONE, + AT_RESPONSE_CODE_BUSY, + AT_RESPONSE_CODE_NO_ANSWER, + AT_RESPONSE_CODE_FCERROR, + AT_RESPONSE_CODE_FRH3 +}; + +/*! + AT profile. +*/ +typedef struct +{ + /*! TRUE if character echo is enabled */ + int echo; + /*! TRUE if verbose reporting is enabled */ + int verbose; + /*! TRUE if result codes are verbose */ + int result_code_format; + /*! TRUE if pulse dialling is the default */ + int pulse_dial; + /*! ??? */ + int double_escape; + /*! ??? */ + int adaptive_receive; + /*! The state of all possible S registers */ + uint8_t s_regs[100]; +} at_profile_t; + +/*! + AT descriptor. This defines the working state for a single instance of + the AT interpreter. +*/ +struct at_state_s +{ + at_profile_t p; + /*! Value set by +GCI */ + int country_of_installation; + /*! Value set by +FIT */ + int dte_inactivity_timeout; + /*! Value set by +FIT */ + int dte_inactivity_action; + /*! Value set by L */ + int speaker_volume; + /*! Value set by M */ + int speaker_mode; + /*! This is no real DTE rate. This variable is for compatibility this serially + connected modems. */ + /*! Value set by +IPR/+FPR */ + int dte_rate; + /*! Value set by +ICF */ + int dte_char_format; + /*! Value set by +ICF */ + int dte_parity; + /*! Value set by &C */ + int rlsd_behaviour; + /*! Value set by &D */ + int dtr_behaviour; + /*! Value set by +FCL */ + int carrier_loss_timeout; + /*! Value set by X */ + int result_code_mode; + /*! Value set by +IDSR */ + int dsr_option; + /*! Value set by +ILSD */ + int long_space_disconnect_option; + /*! Value set by +ICLOK */ + int sync_tx_clock_source; + /*! Value set by +EWIND */ + int rx_window; + /*! Value set by +EWIND */ + int tx_window; + + int v8bis_signal; + int v8bis_1st_message; + int v8bis_2nd_message; + int v8bis_sig_en; + int v8bis_msg_en; + int v8bis_supp_delay; + + uint8_t rx_data[256]; + int rx_data_bytes; + + int display_call_info; + int call_info_displayed; + char *call_date; + char *call_time; + char *originating_name; + char *originating_number; + char *originating_ani; + char *destination_number; + char *local_id; + /*! The currently select FAX modem class. 0 = data modem mode. */ + int fclass_mode; + int at_rx_mode; + int rings_indicated; + int do_hangup; + int silent_dial; + int ok_is_pending; + int dte_is_waiting; + /*! \brief TRUE if a carrier is presnt. Otherwise FALSE. */ + int rx_signal_present; + /*! \brief TRUE if a modem has trained, Otherwise FALSE. */ + int rx_trained; + int transmit; + + char line[256]; + int line_ptr; + + at_modem_control_handler_t *modem_control_handler; + void *modem_control_user_data; + at_tx_handler_t *at_tx_handler; + void *at_tx_user_data; + at_class1_handler_t *class1_handler; + void *class1_user_data; + + /*! \brief Error and flow logging control */ + logging_state_t logging; +}; + +#ifdef __cplusplus +extern "C" { +#endif + +void at_set_at_rx_mode(at_state_t *s, int new_mode); + +void at_put_response(at_state_t *s, const char *t); + +void at_put_numeric_response(at_state_t *s, int val); + +void at_put_response_code(at_state_t *s, int code); + +void at_reset_call_info(at_state_t *s); + +/*! Set the call information for an AT interpreter. + \brief Set the call information for an AT interpreter. + \param s The AT interpreter context. + \param call_date . + \param call_time . + \param originating_name . + \param originating_number . + \param originating_ani . + \param destination_number . */ +void at_set_call_info(at_state_t *s, + char const *call_date, + char const *call_time, + char const *originating_name, + char const *originating_number, + char const *originating_ani, + char const *destination_number); + +void at_display_call_info(at_state_t *s); + +int at_modem_control(at_state_t *s, int op, const char *num); + +void at_call_event(at_state_t *s, int event); + +void at_interpreter(at_state_t *s, const char *cmd, int len); + +void at_set_class1_handler(at_state_t *s, at_class1_handler_t handler, void *user_data); + +at_state_t *at_init(at_state_t *s, + at_tx_handler_t *at_tx_handler, + void *at_tx_user_data, + at_modem_control_handler_t *modem_control_handler, + void *modem_control_user_data); + +#ifdef __cplusplus +} +#endif + +#endif +/*- End of file ------------------------------------------------------------*/