Mercurial > hg > audiostuff
view spandsp-0.0.6pre17/src/make_at_dictionary.c @ 6:22a74b01a099 default tip
implement more meaningful test program
| author | Peter Meerwald <pmeerw@cosy.sbg.ac.at> |
|---|---|
| date | Fri, 25 Jun 2010 16:14:50 +0200 |
| parents | 26cd8f1ef0b1 |
| children |
line wrap: on
line source
/* * SpanDSP - a series of DSP components for telephony * * make_at_dictionary.c - Generate a trie based dictionary for the AT * commands supported by the AT interpreter. * * Written by Steve Underwood <steveu@coppice.org> * * Copyright (C) 2006 Steve Underwood * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License version 2.1, * as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * $Id: make_at_dictionary.c,v 1.6 2009/10/09 14:53:57 steveu Exp $ */ #if defined(HAVE_CONFIG_H) #include "config.h" #endif #include <inttypes.h> #include <stdlib.h> #include <stdio.h> #include <fcntl.h> #include <string.h> #include <assert.h> const char *wordlist[] = { " ", /* Dummy to absorb spaces in commands */ "&C", /* V.250 6.2.8 - Circuit 109 (received line signal detector), behaviour */ "&D", /* V.250 6.2.9 - Circuit 108 (data terminal ready) behaviour */ "&F", /* V.250 6.1.2 - Set to factory-defined configuration */ "+A8A", /* V.251 6.3 - V.8 calling tone indication */ "+A8C", /* V.251 6.2 - V.8 answer signal indication */ "+A8E", /* V.251 5.1 - V.8 and V.8bis operation controls */ "+A8I", /* V.251 6.1 - V.8 CI signal indication */ "+A8J", /* V.251 6.4 - V.8 negotiation complete */ "+A8M", /* V.251 5.2 - Send V.8 menu signals */ "+A8R", /* V.251 6.6 - V.8bis signal and message reporting */ "+A8T", /* V.251 5.3 - Send V.8bis signal and/or message(s) */ "+ASTO", /* V.250 6.3.15 - Store telephone number */ "+CAAP", /* 3GPP TS 27.007 7.25 - Automatic answer for eMLPP Service */ "+CACM", /* 3GPP TS 27.007 8.25 - Accumulated call meter */ "+CACSP", /* 3GPP TS 27.007 11.1.7 - Voice Group or Voice Broadcast Call State Attribute Presentation */ "+CAD", /* IS-99 5.6.3 - Query analogue or digital service */ "+CAEMLPP", /* 3GPP TS 27.007 7.22 - eMLPP Priority Registration and Interrogation */ "+CAHLD", /* 3GPP TS 27.007 11.1.3 - Leave an ongoing Voice Group or Voice Broadcast Call */ "+CAJOIN", /* 3GPP TS 27.007 11.1.1 - Accept an incoming Voice Group or Voice Broadcast Call */ "+CALA", /* 3GPP TS 27.007 8.16 - Alarm */ "+CALCC", /* 3GPP TS 27.007 11.1.6 - List current Voice Group and Voice Broadcast Calls */ "+CALD", /* 3GPP TS 27.007 8.38 - Delete alar m */ "+CALM", /* 3GPP TS 27.007 8.20 - Alert sound mode */ "+CAMM", /* 3GPP TS 27.007 8.26 - Accumulated call meter maximum */ "+CANCHEV", /* 3GPP TS 27.007 11.1.8 - NCH Support Indication */ "+CAOC", /* 3GPP TS 27.007 7.16 - Advice of Charge */ "+CAPD", /* 3GPP TS 27.007 8.39 - Postpone or dismiss an alarm */ "+CAPTT", /* 3GPP TS 27.007 11.1.4 - Talker Access for Voice Group Call */ "+CAREJ", /* 3GPP TS 27.007 11.1.2 - Reject an incoming Voice Group or Voice Broadcast Call */ "+CAULEV", /* 3GPP TS 27.007 11.1.5 - Voice Group Call Uplink Status Presentation */ "+CBC", /* 3GPP TS 27.007 8.4 - Battery charge */ "+CBCS", /* 3GPP TS 27.007 11.3.2 - VBS subscriptions and GId status */ "+CBIP", /* IS-99 5.6 - Base station IP address */ "+CBST", /* 3GPP TS 27.007 6.7 - Select bearer service type */ "+CCFC", /* 3GPP TS 27.007 7.11 - Call forwarding number and conditions */ "+CCLK", /* 3GPP TS 27.007 8.15 - Clock */ "+CCS", /* IS-135 4.1.22 - Compression status */ "+CCUG", /* 3GPP TS 27.007 7.10 - Closed user group */ "+CCWA", /* 3GPP TS 27.007 7.12 - Call waiting */ "+CCWE", /* 3GPP TS 27.007 8.28 - Call Meter maximum event */ "+CDIP", /* 3GPP TS 27.007 7.9 - Called line identification presentation */ "+CDIS", /* 3GPP TS 27.007 8.8 - Display control */ "+CDV", /* IS-99 5.6 - Dial command for voice call */ "+CEER", /* 3GPP TS 27.007 6.10 - Extended error report */ "+CESP", /* GSM07.05 3.2.4 - Enter SMS block mode protocol */ "+CFCS", /* 3GPP TS 27.007 7.24 - Fast call setup conditions */ "+CFG", /* IS-99 5.6 - Configuration string */ "+CFUN", /* 3GPP TS 27.007 8.2 - Set phone functionality */ "+CGACT", /* 3GPP TS 27.007 10.1.10 - PDP context activate or deactivate */ "+CGANS", /* 3GPP TS 27.007 10.1.16 - Manual response to a network request for PDP context activation */ "+CGATT", /* 3GPP TS 27.007 10.1.9 - PS attach or detach */ "+CGAUTO", /* 3GPP TS 27.007 10.1.15 - Automatic response to a network request for PDP context activation */ "+CGCAP", /* IS-99 5.6 - Request complete capabilities list */ "+CGCLASS", /* 3GPP TS 27.007 10.1.17 - GPRS mobile station class (GPRS only) */ "+CGCLOSP", /* 3GPP TS 27.007 10.1.13 - Configure local octet stream PAD parameters (Obsolete) */ "+CGCLPAD", /* 3GPP TS 27.007 10.1.12 - Configure local triple-X PAD parameters (GPRS only) (Obsolete) */ "+CGCMOD", /* 3GPP TS 27.007 10.1.11 - PDP Context Modify */ "+CGCS", /* 3GPP TS 27.007 11.3.1 - VGCS subscriptions and GId status */ "+CGDATA", /* 3GPP TS 27.007 10.1.12 - Enter data state */ "+CGDCONT", /* 3GPP TS 27.007 10.1.1 - Define PDP Context */ "+CGDSCONT",/* 3GPP TS 27.007 10.1.2 - Define Secondary PDP Context */ "+CGEQMIN", /* 3GPP TS 27.007 10.1.7 - 3G Quality of Service Profile (Minimum acceptable) */ "+CGEQNEG", /* 3GPP TS 27.007 10.1.8 - 3G Quality of Service Profile (Negotiated) */ "+CGEQREQ", /* 3GPP TS 27.007 10.1.6 - 3G Quality of Service Profile (Requested) */ "+CGEREP", /* 3GPP TS 27.007 10.1.18 - Packet Domain event reporting */ "+CGMI", /* 3GPP TS 27.007 5.1 - Request manufacturer identification */ "+CGMM", /* 3GPP TS 27.007 5.2 - Request model identification */ "+CGMR", /* 3GPP TS 27.007 5.3 - Request revision identification */ "+CGOI", /* IS-99 5.6 - Request global object identification */ "+CGPADDR", /* 3GPP TS 27.007 10.1.14 - Show PDP address */ "+CGQMIN", /* 3GPP TS 27.007 10.1.5 - Quality of Service Profile (Minimum acceptable) */ "+CGQREQ", /* 3GPP TS 27.007 10.1.4 - Quality of Service Profile (Requested) */ "+CGREG", /* 3GPP TS 27.007 10.1.19 - GPRS network registration status */ "+CGSMS", /* 3GPP TS 27.007 10.1.20 - Select service for MO SMS messages */ "+CGSN", /* 3GPP TS 27.007 5.4 - Request product serial number identification */ "+CGTFT", /* 3GPP TS 27.007 10.1.3 - Traffic Flow Template */ "+CHLD", /* 3GPP TS 27.007 7.13 - Call related supplementary services */ "+CHSA", /* 3GPP TS 27.007 6.18 - HSCSD non-transparent asymmetry configuration */ "+CHSC", /* 3GPP TS 27.007 6.15 - HSCSD current call parameters */ "+CHSD", /* 3GPP TS 27.007 6.12 - HSCSD device parameters */ "+CHSN", /* 3GPP TS 27.007 6.14 - HSCSD non-transparent call configuration */ "+CHSR", /* 3GPP TS 27.007 6.16 - HSCSD parameters report */ "+CHST", /* 3GPP TS 27.007 6.13 - HSCSD transparent call configuration */ "+CHSU", /* 3GPP TS 27.007 6.17 - HSCSD automatic user initiated upgrading */ "+CHUP", /* 3GPP TS 27.007 6.5 - Hangup call */ "+CHV", /* IS-99 5.6 - Hang-up voice */ "+CIMI", /* 3GPP TS 27.007 5.6 - Request international mobile subscriber identity */ "+CIND", /* 3GPP TS 27.007 8.9 - Indicator control */ "+CIT", /* IS-99 5.6 - Command state inactivity timer */ "+CKPD", /* 3GPP TS 27.007 8.7 - Keypad control */ "+CLAC", /* 3GPP TS 27.007 8.37 - List all available AT commands */ "+CLAE", /* 3GPP TS 27.007 8.31 - Language Event */ "+CLAN", /* 3GPP TS 27.007 8.30 - Set Language */ "+CLCC", /* 3GPP TS 27.007 7.18 - List current calls */ "+CLCK", /* 3GPP TS 27.007 7.4 - Facility lock */ "+CLIP", /* 3GPP TS 27.007 7.6 - Calling line identification presentation */ "+CLIR", /* 3GPP TS 27.007 7.7 - Calling line identification restriction */ "+CLVL", /* 3GPP TS 27.007 8.23 - Loudspeaker volume level */ "+CMAR", /* 3GPP TS 27.007 8.36 - Master reset */ "+CMEC", /* 3GPP TS 27.007 8.6 - Mobile termination control mode */ "+CMEE", /* GSM07.07 9.1 - Report mobile equipment error */ "+CMER", /* 3GPP TS 27.007 8.10 - Mobile termination event reporting */ "+CMGC", /* GSM07.05 3.5.5/4.5 - Send command */ "+CMGD", /* GSM07.05 3.5.4 - Delete message */ "+CMGF", /* GSM07.05 3.2.3 - Message Format */ "+CMGL", /* GSM07.05 3.4.2/4.1 - List messages */ "+CMGR", /* GSM07.05 3.4.3/4.2 - Read message */ "+CMGS", /* GSM07.05 3.5.1/4.3 - Send message */ "+CMGW", /* GSM07.05 3.5.3/4.4 - Write message to memory */ "+CMIP", /* IS-99 5.6 - Mobile station IP address */ "+CMM", /* IS-135 4.1.23 - Menu map */ "+CMMS", /* GSM07.05 3.5.6 - More messages to send */ "+CMOD", /* 3GPP TS 27.007 6.4 - Call mode */ "+CMSS", /* GSM07.05 3.5.2/4.7 - Send message from storage */ "+CMUT", /* 3GPP TS 27.007 8.24 - Mute control */ "+CMUX", /* 3GPP TS 27.007 5.7 - Multiplexing mode */ "+CNMA", /* GSM07.05 3.4.4/4.6 - New message acknowledgement to terminal adapter */ "+CNMI", /* GSM07.05 3.4.1 - New message indications to terminal equipment */ "+CNUM", /* 3GPP TS 27.007 7.1 - Subscriber number */ "+COLP", /* 3GPP TS 27.007 7.8 - Connected line identification presentation */ "+COPN", /* 3GPP TS 27.007 7.21 - Read operator names */ "+COPS", /* 3GPP TS 27.007 7.3 - PLMN selection */ "+COS", /* IS-135 4.1.24 - Originating service */ "+COTDI", /* 3GPP TS 27.007 11.1.9 - Originator to Dispatcher Information */ "+CPAS", /* 3GPP TS 27.007 8.1 - Phone activity status */ "+CPBF", /* 3GPP TS 27.007 8.13 - Find phonebook entries */ "+CPBR", /* 3GPP TS 27.007 8.12 - Read phonebook entries */ "+CPBS", /* 3GPP TS 27.007 8.11 - Select phonebook memory storage */ "+CPBW", /* 3GPP TS 27.007 8.14 - Write phonebook entry */ "+CPIN", /* 3GPP TS 27.007 8.3 - Enter PIN */ "+CPLS", /* 3GPP TS 27.007 7.20 - Selection of preferred PLMN list */ "+CPMS", /* GSM07.05 3.2.2 - Preferred message storage */ "+CPOL", /* 3GPP TS 27.007 7.19 - Preferred PLMN list */ "+CPPS", /* 3GPP TS 27.007 7.23 - eMLPP subscriptions */ "+CPROT", /* 3GPP TS 27.007 8.42 - Enter protocol mode */ "+CPUC", /* 3GPP TS 27.007 8.27 - Price per unit and currency table */ "+CPWC", /* 3GPP TS 27.007 8.29 - Power class */ "+CPWD", /* 3GPP TS 27.007 7.5 - Change password */ "+CQD", /* IS-135 4.1.25 - Query disconnect timer */ "+CR", /* 3GPP TS 27.007 6.9 - Service reporting control */ "+CRC", /* 3GPP TS 27.007 6.11 - Cellular result codes */ "+CREG", /* 3GPP TS 27.007 7.2 - Network registration */ "+CRES", /* GSM07.05 3.3.6 - Restore Settings */ "+CRLP", /* 3GPP TS 27.007 6.8 - Radio link protocol */ "+CRM", /* IS-99 5.6 - Set rm interface protocol */ "+CRMC", /* 3GPP TS 27.007 8.34 - Ring Melody Control */ "+CRMP", /* 3GPP TS 27.007 8.35 - Ring Melody Playback */ "+CRSL", /* 3GPP TS 27.007 8.21 - Ringer sound level */ "+CRSM", /* 3GPP TS 27.007 8.18 - Restricted SIM access */ "+CSAS", /* GSM07.05 3.3.5 - Save settings */ "+CSCA", /* GSM07.05 3.3.1 - Service centre address */ "+CSCB", /* GSM07.05 3.3.4 - Select cell broadcast message types */ "+CSCC", /* 3GPP TS 27.007 8.19 - Secure control command */ "+CSCS", /* 3GPP TS 27.007 5.5 - Select TE character set */ "+CSDF", /* 3GPP TS 27.007 6.22 - Settings date format */ "+CSDH", /* GSM07.05 3.3.3 - Show text mode parameters */ "+CSGT", /* 3GPP TS 27.007 8.32 - Set Greeting Text */ "+CSIL", /* 3GPP TS 27.007 6.23 - Silence Command */ "+CSIM", /* 3GPP TS 27.007 8.17 - Generic SIM access */ "+CSMP", /* GSM07.05 3.3.2 - Set text mode parameters */ "+CSMS", /* GSM07.05 3.2.1 - Select Message Service */ "+CSNS", /* 3GPP TS 27.007 6.19 - Single numbering scheme */ "+CSQ", /* 3GPP TS 27.007 8.5 - Signal quality */ "+CSS", /* IS-135 4.1.28 - Serving system identification */ "+CSSN", /* 3GPP TS 27.007 7.17 - Supplementary service notifications */ "+CSTA", /* 3GPP TS 27.007 6.1 - Select type of address */ "+CSTF", /* 3GPP TS 27.007 6.24 - Settings time format */ "+CSVM", /* 3GPP TS 27.007 8.33 - Set Voice Mail Number */ "+CTA", /* IS-135 4.1.29 - MT-Terminated async. Data calls */ "+CTF", /* IS-135 4.1.30 - MT-Terminated FAX calls */ "+CTFR", /* 3GPP TS 27.007 7.14 - Call deflection */ "+CTZR", /* 3GPP TS 27.007 8.41 - Time Zone Reporting */ "+CTZU", /* 3GPP TS 27.007 8.40 - Automatic Time Zone Update */ "+CUSD", /* 3GPP TS 27.007 7.15 - Unstructured supplementary service data */ "+CUUS1", /* 3GPP TS 27.007 7.26 - User to User Signalling Service 1 */ "+CV120", /* 3GPP TS 27.007 6.21 - V.120 rate adaption protocol */ "+CVHU", /* 3GPP TS 27.007 6.20 - Voice Hangup Control */ "+CVIB", /* 3GPP TS 27.007 8.22 - Vibrator mode */ "+CXT", /* IS-99 5.6 - Cellular extension */ "+DR", /* V.250 6.6.2 - Data compression reporting */ "+DS", /* V.250 6.6.1 - Data compression */ "+DS44", /* V.250 6.6.2 - V.44 data compression */ "+EB", /* V.250 6.5.2 - Break handling in error control operation */ "+EFCS", /* V.250 6.5.4 - 32-bit frame check sequence */ "+EFRAM", /* V.250 6.5.8 - Frame length */ "+ER", /* V.250 6.5.5 - Error control reporting */ "+ES", /* V.250 6.5.1 - Error control selection */ "+ESA", /* V.80 8.2 - Synchronous access mode configuration */ "+ESR", /* V.250 6.5.3 - Selective repeat */ "+ETBM", /* V.250 6.5.6 - Call termination buffer management */ "+EWIND", /* V.250 6.5.7 - Window size */ "+F34", /* T.31 B.6.1 - Initial V.34 rate controls for FAX */ "+FAA", /* T.32 8.5.2.5 - Adaptive Answer parameter */ "+FAP", /* T.32 8.5.1.12 - Addressing and polling capabilities parameter */ "+FAR", /* T.31 8.5.1 - Adaptive reception control */ "+FBO", /* T.32 8.5.3.4 - Phase C data bit order */ "+FBS", /* T.32 8.5.3.2 - Buffer Size, read only parameter */ "+FBU", /* T.32 8.5.1.10 - HDLC Frame Reporting parameter */ "+FCC", /* T.32 8.5.1.1 - DCE capabilities parameters */ "+FCL", /* T.31 8.5.2 - Carrier loss timeout */ "+FCLASS", /* T.31 8.2 - Capabilities identification and control */ "+FCQ", /* T.32 8.5.2.3 - Copy quality checking parameter */ "+FCR", /* T.32 8.5.1.9 - Capability to receive parameter */ "+FCS", /* T.32 8.5.1.3 - Current Session Results parameters */ "+FCT", /* T.32 8.5.2.6 - DTE phase C timeout parameter */ "+FDD", /* T.31 8.5.3 - Double escape character replacement */ "+FDR", /* T.32 8.3.4 - Data reception command */ "+FDT", /* T.32 8.3.3 - Data transmission command */ "+FEA", /* T.32 8.5.3.5 - Phase C received EOL alignment parameter */ "+FFC", /* T.32 8.5.3.6 - Format conversion parameter */ "+FFD", /* T.32 8.5.1.14 - File diagnostic message parameter */ "+FHS", /* T.32 8.5.2.7 - Call termination status parameter */ "+FIE", /* T.32 8.5.2.1 - Procedure interrupt enable parameter */ "+FIP", /* T.32 8.3.6 - Initialize facsimile parameters */ "+FIS", /* T.32 8.5.1.2 - Current session parameters */ "+FIT", /* T.31 8.5.4 - DTE inactivity timeout */ "+FKS", /* T.32 8.3.5 - Session termination command */ "+FLI", /* T.32 8.5.1.5 - Local ID string parameter, TSI or CSI */ "+FLO", /* T.31 says to implement something similar to +IFC */ "+FLP", /* T.32 8.5.1.7 - Indicate document to poll parameter */ "+FMI", /* T.31 says to duplicate +GMI */ "+FMM", /* T.31 says to duplicate +GMM */ "+FMR", /* T.31 says to duplicate +GMR */ "+FMS", /* T.32 8.5.2.9 - Minimum phase C speed parameter */ "+FND", /* T.32 8.5.2.10 - Non-Standard Message Data Indication parameter */ "+FNR", /* T.32 8.5.1.11 - Negotiation message reporting control parameters */ "+FNS", /* T.32 8.5.1.6 - Non-Standard Frame FIF parameter */ "+FPA", /* T.32 8.5.1.13 - Selective polling address parameter */ "+FPI", /* T.32 8.5.1.5 - Local Polling ID String parameter */ "+FPP", /* T.32 8.5.3 - Facsimile packet protocol */ "+FPR", /* T.31 says to implement something similar to +IPR */ "+FPS", /* T.32 8.5.2.2 - Page Status parameter */ "+FPW", /* T.32 8.5.1.13 - PassWord parameter (Sending or Polling) */ "+FRH", /* T.31 8.3.6 - HDLC receive */ "+FRM", /* T.31 8.3.4 - Facsimile receive */ "+FRQ", /* T.32 8.5.2.4 - Receive Quality Thresholds parameters */ "+FRS", /* T.31 8.3.2 - Receive silence */ "+FRY", /* T.32 8.5.2.8 - ECM Retry Value parameter */ "+FSA", /* T.32 8.5.1.13 - Subaddress parameter */ "+FSP", /* T.32 8.5.1.8 - Request to poll parameter */ "+FTH", /* T.31 8.3.5 - HDLC transmit */ "+FTM", /* T.31 8.3.3 - Facsimile transmit */ "+FTS", /* T.31 8.3.1 - Transmit silence */ "+GCAP", /* V.250 6.1.9 - Request complete capabilities list */ "+GCI", /* V.250 6.1.10 - Country of installation, */ "+GMI", /* V.250 6.1.4 - Request manufacturer identification */ "+GMM", /* V.250 6.1.5 - Request model identification */ "+GMR", /* V.250 6.1.6 - Request revision identification */ "+GOI", /* V.250 6.1.8 - Request global object identification */ "+GSN", /* V.250 6.1.7 - Request product serial number identification */ "+IBC", /* V.80 7.9 - Control of in-band control */ "+IBM", /* V.80 7.10 - In-band MARK idle reporting control */ "+ICF", /* V.250 6.2.11 - DTE-DCE character framing */ "+ICLOK", /* V.250 6.2.14 - Select sync transmit clock source */ "+IDSR", /* V.250 6.2.16 - Select data set ready option */ "+IFC", /* V.250 6.2.12 - DTE-DCE local flow control */ "+ILRR", /* V.250 6.2.13 - DTE-DCE local rate reporting */ "+ILSD", /* V.250 6.2.15 - Select long space disconnect option */ "+IPR", /* V.250 6.2.10 - Fixed DTE rate */ "+IRTS", /* V.250 6.2.17 - Select synchronous mode RTS option */ "+ITF", /* V.80 8.4 - Transmit flow control thresholds */ "+MA", /* V.250 6.4.2 - Modulation automode control */ "+MR", /* V.250 6.4.3 - Modulation reporting control */ "+MS", /* V.250 6.4.1 - Modulation selection */ "+MSC", /* V.250 6.4.8 - Seamless rate change enable */ "+MV18AM", /* V.250 6.4.6 - V.18 answering message editing */ "+MV18P", /* V.250 6.4.7 - Order of probes */ "+MV18R", /* V.250 6.4.5 - V.18 reporting control */ "+MV18S", /* V.250 6.4.4 - V.18 selection */ "+PCW", /* V.250 6.8.1 - Call waiting enable (V.92 DCE) */ "+PIG", /* V.250 6.8.5 - PCM upstream ignore */ "+PMH", /* V.250 6.8.2 - Modem on hold enable */ "+PMHF", /* V.250 6.8.6 - V.92 Modem on hold hook flash */ "+PMHR", /* V.250 6.8.4 - Initiate modem on hold */ "+PMHT", /* V.250 6.8.3 - Modem on hold timer */ "+PQC", /* V.250 6.8.7 - V.92 Phase 1 and Phase 2 Control */ "+PSS", /* V.250 6.8.8 - V.92 Use Short Sequence */ "+SAC", /* V.252 3.4 - Audio transmit configuration */ "+SAM", /* V.252 3.5 - Audio receive mode */ "+SAR", /* V.252 5.3 - Audio receive channel indication */ "+SARR", /* V.252 3.9 - Audio indication reporting */ "+SAT", /* V.252 5.4 - Audio transmit channel indication */ "+SCRR", /* V.252 3.11 - Capabilities indication reporting */ "+SDC", /* V.252 3.3 - Data configuration */ "+SDI", /* V.252 5.2 - Data channel identification */ "+SDR", /* V.252 3.8 - Data indication reporting */ "+SRSC", /* V.252 5.1.2 - Remote terminal simultaneous capability indication */ "+STC", /* V.252 3.1 - Terminal configuration */ "+STH", /* V.252 3.2 - Close logical channel */ "+SVC", /* V.252 3.6 - Video transmit configuration */ "+SVM", /* V.252 3.7 - Video receive mode */ "+SVR", /* V.252 5.5 - Video receive channel indication */ "+SVRR", /* V.252 3.10 - Video indication reporting */ "+SVT", /* V.252 5.6 - Video transmit channel indication */ "+TADR", /* V.250 6.7.2.9 - Local V.54 address */ "+TAL", /* V.250 6.7.2.15 - Local analogue loop */ "+TALS", /* V.250 6.7.2.6 - Analogue loop status */ "+TDLS", /* V.250 6.7.2.7 - Local digital loop status */ "+TE140", /* V.250 6.7.2.1 - Enable ckt 140 */ "+TE141", /* V.250 6.7.2.2 - Enable ckt 141 */ "+TEPAL", /* V.250 6.7.2.5 - Enable front panel analogue loop */ "+TEPDL", /* V.250 6.7.2.4 - Enable front panel RDL */ "+TERDL", /* V.250 6.7.2.3 - Enable RDL from remote */ "+TLDL", /* V.250 6.7.2.13 - Local digital loop */ "+TMO", /* V.250 6.9 - V.59 command */ "+TMODE", /* V.250 6.7.2.10 - Set V.54 mode */ "+TNUM", /* V.250 6.7.2.12 - Errored bit and block counts */ "+TRDL", /* V.250 6.7.2.14 - Request remote digital loop */ "+TRDLS", /* V.250 6.7.2.8 - Remote digital loop status */ "+TRES", /* V.250 6.7.2.17 - Self test result */ "+TSELF", /* V.250 6.7.2.16 - Self test */ "+TTER", /* V.250 6.7.2.11 - Test error rate */ "+VAC", /* V.252 4.1 - Set audio code */ "+VACR", /* V.252 6.1 - Audio code report */ "+VBT", /* 3GPP TS 27.007 C.2.2 - Buffer threshold setting */ "+VCID", /* V.253 9.2.3 - Caller ID service */ "+VCIDR", /* V.252 6.2 - Caller ID report */ "+VDID", /* V.253 9.2.4 - DID service */ "+VDIDR", /* V.252 6.2 - DID report */ "+VDR", /* V.253 10.3.1 - Distinctive ring (ring cadence reporting) */ "+VDT", /* V.253 10.3.2 - Control tone cadence reporting */ "+VDX", /* V.253 10.5.6 - Speakerphone duplex mode */ "+VEM", /* V.253 10.5.7 - Deliver event reports */ "+VGM", /* V.253 10.5.2 - Microphone gain */ "+VGR", /* V.253 10.2.1 - Receive gain selection */ "+VGS", /* V.253 10.5.3 - Speaker gain */ "+VGT", /* V.253 10.2.2 - Volume selection */ "+VHC", /* V.252 4.12 - Telephony port hook control */ "+VIP", /* V.253 10.1.1 - Initialize voice parameters */ "+VIT", /* V.253 10.2.3 - DTE/DCE inactivity timer */ "+VLS", /* V.253 10.2.4 - Analogue source/destination selection */ "+VNH", /* V.253 9.2.5 - Automatic hangup control */ "+VPH", /* V.252 4.11 - Phone hookswitch status */ "+VPP", /* V.253 10.4.2 - Voice packet protocol */ "+VPR", /* IS-101 10.4.3 - Select DTE/DCE interface rate */ "+VRA", /* V.253 10.2.5 - Ringing tone goes away timer */ "+VRID", /* Extension - Find the originating and destination numbers */ "+VRL", /* V.253 10.1.2 - Ring local phone */ "+VRN", /* V.253 10.2.6 - Ringing tone never appeared timer */ "+VRX", /* V.253 10.1.3 - Voice receive state */ "+VSD", /* V.253 10.2.7 - Silence detection (QUIET and SILENCE) */ "+VSID", /* Extension - Set the originating number */ "+VSM", /* V.253 10.2.8 - Compression method selection */ "+VSP", /* V.253 10.5.1 - Voice speakerphone state */ "+VTA", /* V.253 10.5.4 - Train acoustic echo-canceller */ "+VTD", /* V.253 10.2.9 - Beep tone duration timer */ "+VTER", /* V.252 6.4 - Simple telephony event report */ "+VTH", /* V.253 10.5.5 - Train line echo-canceller */ "+VTR", /* V.253 10.1.4 - Voice duplex state */ "+VTS", /* V.253 10.1.5 - DTMF and tone generation in voice */ "+VTX", /* V.253 10.1.6 - Transmit data state */ "+VXT", /* IS-101 10.1.5 - Translate voice data */ "+W", /* TIA-678 5.2.4.1 - Compliance indication */ "+WBAG", /* TIA-678 C.5.6 Bias modem audio gain */ "+WCDA", /* TIA-678 B.3.2.5 Display data link address */ "+WCHG", /* TIA-678 B.3.2.4 Display battery charging status */ "+WCID", /* TIA-678 B.3.2.1 Display system ID (operator) */ "+WCLK", /* TIA-678 B.3.2.3 Lock/unlock DCE */ "+WCPN", /* TIA-678 B.3.2.2 Set personal identification number */ "+WCXF", /* TIA-678 B.3.2.6 Display supported annex B commands */ "+WDAC", /* TIA-678 C.5.1 Data over analogue cellular command query */ "+WDIR", /* TIA-678 C.5.8 Phone number directory selection */ "+WECR", /* TIA-678 C.5.3 Enable cellular result codes */ "+WFON", /* TIA-678 C.5.5 Phone specification */ "+WKPD", /* TIA-678 C.5.7 Keypad emulation */ "+WPBA", /* TIA-678 C.5.9 Phone battery query */ "+WPTH", /* TIA-678 C.5.10 Call path */ "+WRLK", /* TIA-678 C.5.4 Roam lockout */ "+WS45", /* TIA-678 5.2.4.2 DTE-side stack selection */ "+WS46", /* 3GPP TS 27.007 5.9 - PCCA STD-101 [17] select wireless network */ "+WS50", /* TIA-678 B.3.1.1 Normalized signal strength */ "+WS51", /* TIA-678 B.3.1.2 Carrier detect signal threshold */ "+WS52", /* TIA-678 B.3.1.3 Normalized battery level */ "+WS53", /* TIA-678 B.3.1.4 Normalized channel quality */ "+WS54", /* TIA-678 B.3.1.5 Carrier detect channel quality threshold */ "+WS57", /* TIA-678 B.3.1.7 Antenna preference */ "+WS58", /* TIA-678 B.3.1.8 Idle time-out value */ "+WSTL", /* TIA-678 C.5.2 Call session time limit */ ";", /* Dummy to absorb semi-colon delimiters in commands */ "A", /* V.250 6.3.5 - Answer */ "D", /* V.250 6.3.1 - Dial */ "E", /* V.250 6.2.4 - Command echo */ "H", /* V.250 6.3.6 - Hook control */ "I", /* V.250 6.1.3 - Request identification information */ "L", /* V.250 6.3.13 - Monitor speaker loudness */ "M", /* V.250 6.3.14 - Monitor speaker mode */ "O", /* V.250 6.3.7 - Return to online data state */ "P", /* V.250 6.3.3 - Select pulse dialling (command) */ "Q", /* V.250 6.2.5 - Result code suppression */ "S0", /* V.250 6.3.8 - Automatic answer */ "S10", /* V.250 6.3.12 - Automatic disconnect delay */ "S3", /* V.250 6.2.1 - Command line termination character */ "S4", /* V.250 6.2.2 - Response formatting character */ "S5", /* V.250 6.2.3 - Command line editing character */ "S6", /* V.250 6.3.9 - Pause before blind dialling */ "S7", /* V.250 6.3.10 - Connection completion timeout */ "S8", /* V.250 6.3.11 - Comma dial modifier time */ "T", /* V.250 6.3.2 - Select tone dialling (command) */ "V", /* V.250 6.2.6 - DCE response format */ "X", /* V.250 6.2.7 - Result code selection and call progress monitoring control */ "Z", /* V.250 6.1.1 - Reset to default configuration */ NULL }; int packed_ptr = 0; short int packed_trie[30000]; #define ALPHABET_SIZE 128 typedef struct trie_node_s { int first; int last; int node_no; int entry; /* Array of pointers to children */ struct trie_node_s *child_list[ALPHABET_SIZE]; } trie_node_t; typedef struct { int entries; /* The root of the trie */ trie_node_t *root; } trie_t; static trie_node_t *trie_node_create(void) { trie_node_t *s; if ((s = (trie_node_t *) malloc(sizeof(*s)))) { memset(s, 0, sizeof(*s)); s->first = ALPHABET_SIZE - 1; } return s; } /*- End of function --------------------------------------------------------*/ static trie_t *trie_create(void) { trie_t *s; if ((s = (trie_t *) malloc(sizeof(*s)))) { memset(s, 0, sizeof(*s)); s->root = trie_node_create(); } return s; } /*- End of function --------------------------------------------------------*/ static void trie_recursive_add_node_numbers(trie_node_t *t) { int index; if (t) { if (t->first <= t->last) { t->node_no = packed_ptr + 1; packed_ptr += (t->last - t->first + 1 + 3); for (index = 0; index < ALPHABET_SIZE; index++) trie_recursive_add_node_numbers(t->child_list[index]); } else { t->node_no = packed_ptr + 1; packed_ptr += 3; } } } /*- End of function --------------------------------------------------------*/ static void trie_recursive_build_packed_trie(trie_node_t *t) { int i; if (t) { if (t->first <= t->last) { packed_trie[packed_ptr++] = t->first; packed_trie[packed_ptr++] = t->last; packed_trie[packed_ptr++] = t->entry; for (i = t->first; i <= t->last; i++) packed_trie[packed_ptr++] = (t->child_list[i]) ? t->child_list[i]->node_no : 0; for (i = t->first; i <= t->last; i++) trie_recursive_build_packed_trie(t->child_list[i]); } else { packed_trie[packed_ptr++] = 1; packed_trie[packed_ptr++] = 0; packed_trie[packed_ptr++] = t->entry; } } } /*- End of function --------------------------------------------------------*/ static void trie_add(trie_t *s, const char *u, size_t len) { size_t i; int index; trie_node_t *t; s->entries++; /* Loop over the length of the string to add and traverse the trie... */ for (t = s->root, i = 0; i < len; i++) { /* The character in u we are processing... */ index = (unsigned char) u[i]; /* Is there a child node for this character? */ if (t->child_list[index] == NULL) { t->child_list[index] = trie_node_create(); if (index < t->first) t->first = index; if (index > t->last) t->last = index; } /* Move to the new node... and loop */ t = t->child_list[index]; } t->entry = s->entries; } /*- End of function --------------------------------------------------------*/ static void dump_trie(void) { int i; printf("\nstatic const at_cmd_service_t at_commands[] =\n{\n"); for (i = 0; wordlist[i]; i++) { switch (wordlist[i][0]) { case ' ': case ';': printf(" at_cmd_dummy,\n"); break; case '+': printf(" at_cmd_plus_%s,\n", wordlist[i] + 1); break; case '&': printf(" at_cmd_amp_%s,\n", wordlist[i] + 1); break; default: printf(" at_cmd_%s,\n", wordlist[i]); break; } } printf("};\n"); printf("\nstatic const uint16_t command_trie[] =\n{"); for (i = 0; i < packed_ptr; i++) { if ((i & 7) == 0) printf("\n "); printf("0x%04X, ", packed_trie[i]); } printf("\n};\n"); printf("\n#define COMMAND_TRIE_LEN %d\n", packed_ptr); } /*- End of function --------------------------------------------------------*/ int main(int argc, char *argv[]) { trie_t *s; int i; s = trie_create(); for (i = 0; wordlist[i]; i++) trie_add(s, wordlist[i], strlen(wordlist[i])); printf("// The trie contains %d entries\n", i); packed_ptr = 0; trie_recursive_add_node_numbers(s->root); packed_ptr = 0; trie_recursive_build_packed_trie(s->root); dump_trie(); return 0; } /*- End of function --------------------------------------------------------*/ /*- End of file ------------------------------------------------------------*/